Kitchenware Aluminum Circle Plate 1050 1060 1100 Sublimation Aluminum Blanks
ISO 1050 1060 1100 Sublimation Aluminum Circles Plate Plates Kitchenware
Product Description:
1 Aluminum discs have light density
The density of aluminum wafer is 1 series 3 series, 5 series 8 series, alloy aluminum plate and strip, which is made by stamping. Therefore, the metal density of aluminum wafer is generally about 2.71, which is the lowest kind of aluminum metal in our common use. It is better than the formability of iron metal, and lighter than the density of steel.
2. Performance of aluminum wafer
Performance has good stamping performance, the stamping performance is also the original use, the most extensive one, so we are particularly important for the stamping performance of aluminum discs.
3. Formability of aluminum wafer
Bending performance, stretching performance, tensile performance, have excellent, widely used point.
Corrosion resistance of aluminum discs.
Aluminum discs, when used in lamps and lanterns, under the long-term light source, the opposition does not produce much impact on the interior. Therefore, aluminum discs have great corrosion resistance and light density in the loss reporting, so they are widely used. In the field of kitchen utensils, the original plates also have great corrosion resistance. In the issuance belongs to the most range of use in the kitchen lampblack high temperature harsh environment, aluminum discs, can still ensure a long life, up to 15 years of life,
5. Tensile properties of aluminum discs
| Specification | Name: aluminum circle plate | |||||||||||
| Alloy:1000 series | ||||||||||||
| Temper:O-H112 etc. | ||||||||||||
| Thickness: 1.0-4.0mm or customized | ||||||||||||
| Width: Up to 1800mm | ||||||||||||
| Length: Up to 6000mm | ||||||||||||
| Surface treatment: mill finished, anodized, embossed, PVC coated | ||||||||||||
| Feature | Machinability: It is readily machined and is considered as having good machinability for the aluminum alloys,. | |||||||||||
| Forming: It is readily formed by either conventional cold working or hot working. | ||||||||||||
| Welding: It is readily accomplished by means of conventional welding methods. | ||||||||||||
| Heat Treatment: It is a non-heat treatable alloy. | ||||||||||||
| Forging: It may be hot forged in the range of 950 F to 500 F. | ||||||||||||
| Hot Working: The hot working range (as for forging) is 950 F to 500 F. In that range the alloy is easily hot worked. | ||||||||||||
| Cold Working: It is readily cold worked by all conventional methods. | ||||||||||||
| Annealing: Annealing, during or following cold working, is done at 775 F, allowing adequate time for thorough heating, followed by air cooling. | ||||||||||||
| Hardening: Hardens as a result of cold working only. | ||||||||||||
| Application | Chemical equipment, ductwork, and in general sheet metal work, cooking utensils, pressure vessels, builder's hardware, eyelet stock, ice cube trays, garage doors, awning slats, refrigerator panels, gas lines, gasoline tanks, heat exchangers, drawn and spun parts, and storage tanks etc. | |||||||||||
Chemical Composition:
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al | |
| Single | Total | ||||||||||
| 1000series | 0.25 | 0.35 | 5.0－6.0 | 0.03 | 0.03 | 0.18－0.28 | 0.05 | 0.03 | 0.05 | 0.15 | More than 99.6 |
| 2000series | 0.5 | 0.5 | 3.8－4.9 | 0.3-0.9 | 1.2-1.8 | 0.01 | 0.25 | 0.15 | 0.15 | 0.15 | More than 92.6 |
| 3000series | 0.6 | 0.7 | 0.05－0.2 | 1.0-1.5 | - | - | 0.1 | - | 0.05 | 0.15 | More than 97 |
| 5000series | 0.4 | 0.35 | 0.1 | 0.4-1.0 | 4.0～4.9 | 0.05～0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Rem |
| 6000series | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.80-1.2 | 0.04－0.35 | 0.25 | 0.15 | 0.05 | 0.15 | Rem |
| 7000series | 0.4 | 0.5 | 1.2－2.0 | 0.3 | 2.1-2.9 | 0.18－0.28 | 5.1～6.1 | 0.2 | 0.05 | 0.15 | Rem |
Product Details
Applicaion:
Certification:
Packaging & Shipping:
FAQ:
Q1: ARE YOU FACTORY OR TRADER?
A1: Sylaith Special Steel is a cold rolling manufacturer of magnetic stainless steel coil since 2009. We've gained our Export Right and become an integrated company of industry and trade in order to satisfy buyer's multi-request on different material and products.
Q2: HOW TO GET A SAMPLE?
A2: FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side.
Q3: HOW TO VISIT YOUR FACTORY?
A3: Most of the main cities have flights to Shanghai; you can take flight to Shanghai Putong/Hongqiao International Airport.
If you come from Hongkong, it will take 2 hours by flight (every day 5 flight around noon time).
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.