|
Model
|
15KW Stacked Energy Storage System (5KWH battery + 5KW inverter)
|
|
BATTERY
|
|
Battery Type
|
LifePo4
|
|
Battery Energy
|
15.36KWh
|
|
Battery Capacity
|
100Ah (Min 97Ah) x 3
|
|
5KWH Energy Storage System Net Weight
|
181 KG
|
|
5KWH Energy Storage System Net Dimension
|
650*460*765 mm
|
|
Battery Rated Voltage
|
51.2V (16S)
|
|
Overcharge Protection Voltage
|
58.4V
|
|
Overdischarge protection voltage
|
40V
|
|
Maximum Charging Current
|
80A
|
|
Maximum Discharging Current
|
100A
|
|
Packing Part I Weight: Inverter + Base
|
37 KG
|
|
Packing Part Il Weight: Battery
|
53 KG
|
|
Total Packing Part Weight: 1 inverter + 1 base + 3 battery
|
196 KG
|
|
Packing Part I Dimension: Inverter + Base
|
735*550*590 mm
|
|
Packing Part Il Dimension: Battery
|
745*550*320 mm
|
|
Total Packing Part Dimension: 1 inverter + 1 base + 3 battery
|
74.5*55*155 cm
|
|
DOD
|
80%
|
|
Designed Life-span
|
6000
|
|
Four Charging Modes are Optional
|
Solar only, Mains priority, Solar priority, Hybrid charging
|
|
Three Output Modes
|
1.Mains priority mode:
Power supply sequence: Mains power - Photovoltaic - Battery.
2.Inverter priority mode:
Power supply sequence: Photovoltaic - Battery - Mains.
3.Photovoltaic priority mode:
Power supply sequence: Photovoltaic - Mains - Battery.
|
|
PV CHARGE
|
|
Maximum PV Open-circuit Voltage
|
500vdc
|
|
PV Working Voltage Range
|
120-500Vdc
|
|
MPPT Voltage Range
|
120-450Vdc (Suggest: 300 - 400Vdc)
|
|
Maximum PV Input current
|
18A
|
|
Maximum PV Input Power
|
5200W (Suggest: 1500 - 2000W)
|
|
Maximum PV Charing Current
|
80A
|
|
MAINS CHARGING
|
|
Rated Input Voltage
|
220/230Vac(√) 110/120Vac( )
|
|
Input Voltage Range
|
UPS Mains Mode: (170Vac - 280Vac) ± 2%
APL Generator Mode: (90Vac - 280Vac) ± 2%
|
|
Mains Maximum Charging Current
|
60A
|
|
Mains Charging Efficiency
|
>95%
|
|
INVERTER
|
|
Output Waveform
|
Pure Sine Wave
|
|
Rated Output Voltage
|
230Vac (200 / 208 / 220 / 240Vac) (√)
120Vac (100 / 105 / 110Vac) ( )
|
|
Rated Output Power
|
5000W
|
|
Maximum Peak Power
|
10000VA
|
|
Frequency
|
60Hz
|
|
Over Temperature Protection
|
60°C-70°C
|
|
Number of Parallel / Split Phases
|
1-6 pieces
|
|
On-load Motor capacity
|
4HP
|
|
Maximum Efficiency
|
>90%
|
|
No load loss
|
Non Energy-saving Mode: <50W
Energy-saving Mode: <25W (Manual Setup)
|
|
GENERAL DATA
|
|
Certificate
|
CE, UN38.3, MSDS, IEC 62619, Sea report
|
|
Storage time / Temperature
|
6 months @25°C;
3 months @35°C;
1 months @45°C;
|
|
Charging Temperature Range
|
-10~55°C
|
|
Discharging Temperature Range
|
-10~55°C
|
|
Operation Humidity
|
5%~95°C
|
|
Noise
|
60dB (A)
|
|
Recommended Operation Environment
|
Indoor
|
|
Installation Method
|
Horizontal
|
15KWH Stacked Energy Storage System Used For Home Lithium Storage Battery
|
![]()
Quick Details:
1. Battery Energy:15.36KWH
2. Battery Rated Voltage:51.2V (16S)
3. Battery Capacity: 100Ah
4. MPPT Voltage Range:120-450Vdc(Suggest:300-400Vdc)
5. Maximum PV Input Power:5200W(Suggest:3500-4000W)
6. Input Voltage Range: UPS Mains Mode:(170Vac~280Vac)土2%;APL Generator Mode:(90Vac-280Vac)±2%
Precaution:
1.Put the Stacked Energy Storage System in a safe and covered place to prevent sunshine and rain.
2.Do not use the power station for a long time under overload.
3.Do not use this product near water or where it may come into contact with water.
4.Make sure your hands are dry before touching the plug or power connection.
5.This product is not applicable to children, people with physical, sensory or mental disabilities or people lacking experience and knowledge, unless they have been supervised or instructed by the person responsible for their safety
- Residential energy backup during power outages
- Off-grid cabins or vacation homes
- Powering outdoor recreational vehicles and equipment
- Backup power for government facilities and buildings
- Powering remote wildlife tracking and conservation efforts
- Powering off-grid RVs and motorhomes
![]()
![]()
![]()
-
