SS304 250Y Metal Structured Packing for Rectification Column

Metal Structured Packing introduce:

The corrugated packing is suitable for precision rectification and vacuum rectification devices, and provides good results for the rectification of refractory materials and heat-sensitive materials. Although its cost is high, it is widely used due to its good performance. Metal plate corrugated packing is the main form of plate corrugated packing. The corrugated plate of the packing is punched with many small holes of about f5mm, which can roughly distribute the liquid on the plate and strengthen the lateral mixing. The corrugated sheet is rolled into fine grooves, which can finely distribute the liquid on the sheet and enhance the wettability of the surface. Metal orifice corrugated packing has high strength and strong corrosion resistance, and is especially suitable for large-diameter towers and places with heavy gas and liquid loads. Metal calendered orifice corrugated packing is another representative corrugated packing. The main difference between it and metal perforated plate corrugated packing is that the surface of the plate is not punched, but perforated, and very dense perforations with a diameter of 0.4~0.5 mm are rolled on the plate by rolling. Its separation ability is similar to that of reticulated corrugated packing, but its anti-clogging ability is stronger than that of reticulated corrugated packing, and it is cheap and widely used. The advantages of corrugated packing are compact structure, low resistance, high mass transfer efficiency, large processing capacity, and large specific surface area (commonly used are 125, 150, 250, 350, 500, 700, etc.). The disadvantage of corrugated packing is that it is not suitable for processing Materials with high viscosity, easily polymerized or suspended solids are difficult to handle and clean up, and the cost is high.

Structured Packing Parameters

Ceramic corrugated structured packing is composed of hard porcelain, and the main components are clay, quartz, feldspar, etc., which are specially baked. Its shape is composed of many units with the same geometric shape - corrugated sheets parallel to each other and superimposed.
Features:
1. Large circulation. The new tower design can reduce the diameter, and the retrofit of the old tower can greatly increase the processing capacity.
2. High separation efficiency. Much larger specific surface area than random packing
3. Pressure drop. Can save a lot of energy
use:
1. Distillation absorption (dielectric absorption) of corrosive mixtures that have certain requirements for pressure drop and theoretical plate number;
2. Vacuum operation with absolute pressure above 100Pa;
3. Rectification of halogenated organic compounds;
4. Used as heat exchanger, mist eliminator or catalyst carrier, etc.;
5. Lightweight ceramic corrugated packing reduces the tower load and is suitable for large-scale tower reconstruction.

Metal Structured packing model:

About Us:

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment. The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.
During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!

FAQ:

Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB or CIF, packaging term, etc.

Q: Is the size fixed?
A: No, except for table size. Can be customized according to demand!

Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type of products you need.

Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific quantity and type.