Plastic Random Packing

Plastic Random Pall Ring Tower Packing 16mm-76mm for scrubber Tall Inner Surface Area Plastic Random Packing Plastic fillers are lightweight, heat-resistant, and chemical-resistant, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), and chlorinated polyvinyl chloride (CPVC) And the tower packing made of polyvinylidene fluoride (PVDF), the plastic packing has the characteristics of large open space ratio, low pressure

Plastic Random Packing Step Ring Pp Plastic Step Ring Φ50 Introduction to Plastic Random Packing Plastic Raschig rings are the earliest developed random packing. The shape is simple, it is a ring whose height is equal to its diameter. Raschig rings have excellent acid and heat resistance and are resistant to corrosion by various inorganic acids, organic acids and organic solvents except hydrofluoric acid. They can be used on various high-temperature occasions and have a wide

PVC Ozone Absorption Tower Packing Material Plastic Random Packing Introduction to Plastic Random Packing Plastic random packing is not as bulky as ceramic packing and therefore offers higher capacity and lower pressure drop. This product is also used in corrosive applications with low to moderate operating temperatures and can offer economic advantages over metallic materials. Pall ring packing has many window holes on the ring wall, so that the gas and liquid in the packed

DN38 Conjugated Ring Packing Air Cooling Tower Plastic Random Packing Packing Cooling Tower Plastic Random Packing Packing DN38/DN50/DN76 water-cooled tower PP conjugated ring packing has the characteristics of small pressure drop, large gas-liquid contact surface area, and excellent fluid mechanics and mass transfer performance. Polypropylene conjugated ring packing structure*, when installed in the tower, point contact is made between the packing and the tower wall, the gap

Porous Suspended Ball Sewage Treatment Equipment Plastic Random Packing Introduction to Plastic Random Packing Plastic Random Packing is used to reduce the pressure drop across the column, increase capacity compared to trays of the same efficiency, and reduce liquid holdup in the column. Among them, the multi-faceted hollow sphere is processed from polypropylene (PP), and two hemispheres are formed on the outside to form a spherical shape. Each hemisphere has 12 semi-sector

16mm-100mm High For Petrochemical Industry PP PE Plastic Random Packing Tall Inner Surface Area Plastic Random Packing Plastic fillers are lightweight, heat-resistant, and chemical-resistant, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), and chlorinated polyvinyl chloride (CPVC) And the tower packing made of polyvinylidene fluoride (PVDF), the plastic packing has the characteristics of large open space ratio, low

High Temperature Resistant Cpvc Gas Phase Biofilter Plastic Random Packing Introduction to Plastic Random Packing Compared with the commonly used packing products such as Pall ring, step ring, Haier ring, garland, and saddle ring, Plastic Random Packing produced by AHS has high compressive strength, good dust removal effect, uniform and effective dehydration, and long service life. The mass transfer efficiency should be increased by 30%-45%, the pressure drop can be reduced

DN76 PP Gas Desulfurization Tower Different Saddle Ring Plastic Random Packing Different Saddle Ring Plastic Random Packing DN76PP different saddle ring packing for gas desulfurization tower directly sold by manufacturers Therefore, the processing capacity of the torque saddle ring is higher, the pressure drop is small, and the mass transfer performance is improved. The plastic heterosaddle ring packing is similar to the shape of a saddle. This packing layer is mainly an arc

Reinforced Polypropylene Terra Reed Ring RPP Barbed Garland Filler Plastic Random Packing Barbed Garland Filler Plastic Random Packing Reinforced polypropylene TELLERETTE RPP barbed garland filler English name TELLERETTE TELLERETTE filler (referred to as: barbed garland filler, thorn garland filler) The main feature is that the filler has a large porosity, is not easy to be blocked, and has a good porosity. Due to the high liquid stagnation volume in the gap of this packing,

Large Flux And High Mass Transfer Rate PVDF RPP Plastic Pall Ring Packing PVDF RPP Plastic Pall Ring Packing Random-packed plastic reinforced polypropylene RPP rosettes The spot plastic rosettes have a large porosity, are not easy to be blocked, have large flux, low resistance, and have more liquid stagnation in the gap, which makes the liquid residence time in the tower longer and increases the gas flow rate. Liquid contact time. Its structural characteristics make the

Reinforced Plastic High Flow Ring Grid-Like Open-Cell Tower Plastic Random Packing Packing PVDF RPP Plastic Pall Ring Packing Reinforced plastic PP high-flow ring polypropylene grid-shaped open-cell tower packing is a grid-shaped open-cell tower packing developed on the basis of Pall ring structure. gauge Pall rings, and therefore, polypropylene high-flow ring packing for higher fluid flux. Polypropylene high flow ring packing has 45% lower pressure drop per meter than Pall

PVC PP PE 16mm-76mm Tall Inner Surface Area Plastic Random Packing Tall Inner Surface Area Plastic Random Packing Plastic fillers are lightweight, heat-resistant, and chemical-resistant, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), and chlorinated polyvinyl chloride (CPVC) And the tower packing made of polyvinylidene fluoride (PVDF), the plastic packing has the characteristics of large open space ratio, low

Scrubber mass transfer packing PP Lalu ring packing Plastic Random Packing PP Lalu ring packing Plastic Random Packing Mass transfer packing of scrubber PP PP Lalu ring packing is very similar to PP Pall ring. PP Lalu ring is based on Pall ring with flanges added at both ends. This structure improves vapor-liquid distribution and makes full use of The inner surface of the ring is removed, so that the gas and liquid in the packed tower can pass freely from the window. And it

Chemical Resistant Pe Material Chlorine Plastic Random Packing Introduction to Plastic Random Packing Plastic packing has the characteristics of light weight, heat resistance, chemical corrosion resistance, etc., including tower packing made of PP, PE, RPP, PVC, CPVC, PVDF and other materials. Plastic packing has large porosity, low pressure drop and mass transfer unit height. , High flooding point, sufficient vapor-liquid contact, and high mass transfer efficiency. Plastic

PVDF Light Weight Gas Packed Tower Pall Ring Plastic Random Packing Introduction to Plastic Random Packing Plastic fillers mainly include: polyhedral hollow sphere, garland, Haier ring, stepped ring, conjugated ring, Pall ring, rectangular saddle ring, heterosaddle ring, conjugated ring, flat ring, Raschig ring, snow ring, hexagonal Ring, rotating ring, pentagonal ring, conical ring, net ring, cross spherical ring, floating ball, liquid surface covering ball, diamond covering

Chemical Resistant High Operating Flexibility PVDF CPVC Plastic Random Packing Introduction of Plastic Random Packing DN76PP different saddle ring packing for gas desulfurization tower directly sold by manufacturers Therefore, the processing capacity of the torque saddle ring is higher, the pressure drop is small, and the mass transfer performance is improved. The plastic heterosaddle ring packing is similar to the shape of a saddle. This packing layer is mainly an arc-shaped

16mm-76mm High Large Internal Surface Area PVC Plastic Random Packing Cooling Tower Plastic Random Packing Packing DN38/DN50/DN76 water-cooled tower PP conjugated ring packing has the characteristics of small pressure drop, large gas-liquid contact surface area, and excellent fluid mechanics and mass transfer performance. Polypropylene conjugated ring packing structure*, when installed in the tower, point contact is made between the packing and the tower wall, the gap is

Arc Surface Intalox Saddles Packing RPP Plastic Random Packing Introduction to Plastic Random Packing Plastic Random Packing is used to reduce the pressure drop across the column, increase capacity compared to trays of the same efficiency, and reduce liquid holdup in the column. Among them, the multi-faceted hollow sphere is processed from polypropylene (PP), and two hemispheres are formed on the outside to form a spherical shape. Each hemisphere has 12 semi-sector blades,

Acid And Alkali Resistant Low Temperature Plastic Bulk Filler Introduction to Plastic Random Packing Compared with the commonly used packing products such as Pall ring, step ring, Haier ring, garland, and saddle ring, Plastic Random Packing produced by AHS has high compressive strength, good dust removal effect, uniform and effective dehydration, and long service life. The mass transfer efficiency should be increased by 30%-45%, the pressure drop can be reduced by 30%, and

Spray Tower Transmission Packaging PTFE Saddle Ring Packaging Plastic Random Packaging Tall Inner Surface Area Plastic Random Packing Material Plastic fillers are heat-resistant and chemical-resistant plastics. Plastic filler materials include: polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride ( Tower packing made of CPVC) and polyvinylidene fluoride (PVDF). It has good corrosion resistance, large