125Y , 250Y , 500Y Distillation Column Scrubber Tower Metal Structured Packing

Metal Structured Packing introduce:

Wire mesh corrugated packing is assembled from stainless steel wire mesh corrugated plates. The packing forms a uniform geometric pattern arrangement in the column, which defines the flow path of the vapor and liquid, and improves the channel flow and wall flow phenomenon.

The inclination angle between the screen and the tower axis is generally 30° and 45°. Due to the capillary effect of the screen, the surface area has a large wettability, a low pressure drop, and a small liquid holdup, so it has a very high separation efficiency. Suitable for refractory and thermal systems.

Widely used in petrochemical (such as industrial catalytic cracking extraction section), fertilizer, natural gas, biochemical, environmental protection engineering and other fields. The diameter of the tower equipment is as large as 6 meters, and the separation performance is better than that of metal orifice corrugated packing.

The characteristics of plate hole packing are: roll hole plate corrugated packaging (also known as perforated plate corrugated packaging), made of 0.1mm~0.12mm metal sheet. Because there are more holes on the surface, the residence time of vapor-liquid in the packing surface is prolonged, the vapor-liquid communication in the tower is more sufficient, and the separation power is improved. The standard of packaging is similar to corrugated packaging. Packing aperture is 0.4-0.5mm. It is generally made of corrosion-resistant stainless steel and is used in the petroleum industry, fine chemicals and medical equipment.

Metal Structured packing characteristics:

1. High number of theoretical plates, high flux and low pressure.

2. The number of theoretical plates increases with the decrease of gas load, and there is no low load extreme.

3. Flexible operation.

4. The extension effect is not obvious.

5. It can satisfy the requirements of high precision, large scale and high vacuum distillation of distillation equipment. Material: stainless steel, brass, phosphor copper, low carbon steel, etc. Use: hard separation system, thermal sensitive system, distillation and separation of high purity products.

Metal Structured Packing Application

Wire mesh packing is suitable for a variety of precision separation, fine separation, high-purity separation, cryogenic separation, air separation and other occasions. Each meter of packing layer can provide 3-12 engineering theoretical trays, so that the tower height can be greatly improved. Be careful when using systems with large liquid-gas ratio, strong corrosion systems, dirty blocking systems, high surface tension and high viscosity systems.

1. Simple structure, light weight, large porosity, small pressure drop, large contact surface area and high defoaming efficiency.

2. Odorless, low density, strength, stiffness, hardness and heat resistance are better than low pressure polyethylene, can be around 100 degrees.

3. Has good electrical properties, high-frequency insulation is not affected by humidity, but becomes brittle at temperature, not wear-resistant, and easy to age.

Metal Structured packing model:

About Us:

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment. The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.
During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!

FAQ:

Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB or CIF, packaging term, etc.

Q: Is the size fixed?
A: No, except for table size. Can be customized according to demand!

Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type of products you need.

Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific quantity and type.