S-Plastic Noryl GTX6008 PA6 Based Unfilled GTX For Wheel Cover. Restricted To Sellfor New Customer.

Name: S-Plastic Noryl GTX6008 PA6 Based Unfilled GTX For Wheel Cover. Restricted To Sellfor New Customer.
Brand: SAMTION INTERNATIONAL LIMITED

Price Negotiable

Price: *USD

MOQ: 100KG

Delivery Time: To be negotiated

Brand: S-Plastic Noryl

Product Description

S-Plastics Noryl GTX6008 resin is PA6 based unfilled GTX for wheel cover. Restricted to sellfor new customer.

Property

Property
TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Tensile Stress, yield	41	MPa	S-Plastics - Japan Method
Tensile Strain, break	169 - 169	%	S-Plastics - Japan Method
Flexural Stress	61	MPa	ASTM D 790
Flexural Modulus	1640	MPa	ASTM D 790
IMPACT	Value	Unit	Standard
Izod Impact, notched, 23°C	844	J/m	ASTM D 256
THERMAL	Value	Unit	Standard
HDT, 0.45 MPa, 3.2 mm, unannealed	173	°C	ASTM D 648
CTE, -30°C to 30°C	8.E-05 - 1.E-04	1/°C	TMA
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.07	-	ASTM D 792
Water Absorption, 24 hours	0.6	%	ASTM D 570
Mold Shrinkage, flow, 3.2 mm	0.8 - 1.1	%	S-Plastics Method
Source GMD, last updated:06/09/2000

Processing

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION
(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
(2) Only typical data for selection purposes. Not to be used for part or tool design.
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(4) Internal measurements according to UL standards.