Ultem PEI Resin

S-Plastic Ultem polyimide (PEI) is an amorphous high-performance polymer with excellent heat resistance, good chemical corrosion resistance, inherent flame retardancy and excellent dimensional stability. The glass transition temperature (TG) is 217 ℃, the HDT is 190 ℃, and the relative thermal index (RTI) is 170 ℃. Low smoke emission, meeting the requirements of FDB, FAR and NBS. Low creep sensitivity, low and uniform coefficient of thermal expansion (CTE) (transverse and

S-Plastic Ultem resin series amorphous thermoplastic polyimide (PEI) resins have excellent heat resistance, high strength and rigidity, and a wide range of chemical resistance. Ultem offers transparent and opaque custom colors and glass fill levels. In addition, Ultem copolymers can meet higher thermal, chemical and elastic requirements.Ultem resin uniquely balances mechanical and processing properties, providing design engineers with excellent flexibility and freedom. Ultem

S-Plastic Ultem 2210 resin is 20% Glass fiber filled, enhanced flow Polyimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, brk, Type I, 5 mm/min 139 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 4 % ASTM D 638 Tensile Modulus, 5 mm/min 6890 MPa ASTM D 638 Flexural Stress, brk, 2.6 mm/min, 100 mm span 227 MPa ASTM D 790 Flexural Modulus, 2.6 mm/min, 100 mm span 6890 MPa ASTM D 790

S-Plastic Ultem 2310R resin is 30% Glass fiber filled, enhanced flow Polyimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 168 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 158 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 2 % ASTM D 638 Tensile Modulus, 5 mm/min 9230 MPa ASTM D 638 Flexural Stress, brk, 2.6 mm/min, 100 mm

S-Plastic Ultem 2100 resin is 10% Glass fiber filled, standard flow Polyimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification in recognized colors. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 114 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 115 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 6 % ASTM D 638 Tensile Modulus, 5 mm/min 4680 MPa ASTM D 638 Flexural Stress

S-Plastic Ultem resin series amorphous thermoplastic polyimide (PEI) resins have excellent heat resistance, high strength and rigidity, and a wide range of chemical resistance. Ultem offers transparent and opaque custom colors and glass fill levels. In addition, Ultem copolymers can meet higher thermal, chemical and elastic requirements.Ultem resin uniquely balances mechanical and processing properties, providing design engineers with excellent flexibility and freedom. PEI

Ultem PEI PW1000 is an Unfilled Standard flow Polyimide (Tg 217?C). Specific grade-colors aredesigned and certified for use in Potable Water applications. KTW, WRAS, ACS, NSF-61 and W270 certified. US FDA and European Food Contact approved. ​PropertyPROPERTIESTYPICAL VALUESUNITSTEST METHODSMECHANICAL　　　Taber Abrasion, CS-17, 1 kg10mg/1000cyS-Plastic methodTensile Stress, yield, 50 mm/min105MPaISO 527Tensile Stress, break, 50 mm/min85MPaISO 527Tensile Strain, yield, 50 mm

S-Plastic Ultem AUT200 resin is Transparent high flow Polyimide (Tg 217C). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204C (S-Plastic IP method) ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 105 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM

S-Plastic Ultem AUT200M resin is Transparent high flow Polyimide (Tg 217C) with internal mold release.. Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204C (S-Plastic IP method). ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Taber Abrasion, CS-17, 1 kg 10 mg/1000cy S-Plastic Method Tensile Stress, yield, 50 mm/min 105 MPa ISO 527 Tensile Stress, break, 50 m

S-Plastic Ultem AUT195M resin is High flow Polyimide blend for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 195C (S-Plastic test method). Contains low level of mold release. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 97 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 85 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 7 % ASTM D 638 Tensile

S-Plastic Ultem AUT195 resin is High flow Polyimide blend for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 195C (S-Plastic test method). ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 96 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 145 MPa ASTM D 790 Flexural Modulus, 2.6 mm/min, 100

S-Plastic Ultem ATX3562R resin is 50% Glass fiber and mineral filled, high flow Polyimide blend with internal mold release and enhanced dimensional stability. ECO Conforming. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 125 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 125 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 2.5 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 2.5 % ASTM D 638 Tensile Modulus,

S-Plastic Ultem AX203R resin is 30% Glass fiber filled, high flow Polyimide blend with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 162 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 162 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 2.2 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 2.2 % ASTM D 638 Tensile Modulus, 5 mm/min 10260 MPa ASTM

S-Plastic Ultem ATX202R resin is 20% Glass fiber filled, high flow Polyimide blend with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 139 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 136 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 2.9 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 3 % ASTM D 638 Tensile Modulus, 5 mm/min 7640 MPa ASTM D

S-Plastic Ultem ATX200R resin is High flow Polyimide blend with internal mold release. ECO Conforming, UL94 V0 Listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 96 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 144 MPa ASTM D 790 Flexural Modulus, 2.6 mm/min, 100 mm span 3170 MPa ASTM D 790 IMPACT Value Unit Standard Izod Impact, notched, 23°C 53 J

S-Plastic Ultem ATX200F resin is High flow Polyimide blend. ECO Conforming, UL94 V0 Listing. US FDA Food Contact compliant. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 96 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 144 MPa ASTM D 790 Flexural Modulus, 2.6 mm/min, 100 mm span 3170 MPa ASTM D 790 IMPACT Value Unit Standard Izod Impact, unnotched, 23

S-Plastic Ultem ATX200 resin is High flow Polyimide blend. ECO Conforming, UL94 V0 Listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 96 MPa ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 70 % ASTM D 638 Flexural Stress, yld, 2.6 mm/min, 100 mm span 144 MPa ASTM D 790 Flexural Modulus, 2.6 mm/min, 100 mm span 3170 MPa ASTM D 790 IMPACT Value Unit Standard Izod Impact, unnotched, 23°C 2082 J/m ASTM D 4812 Izod

S-Plastic Ultem ATX153R resin is 30% Glass fiber filled, high flow Polyimide blend with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 144 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 144 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 2.5 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 2.5 % ASTM D 638 Tensile Modulus, 5 mm/min 9690 MPa ASTM

S-Plastic Ultem ATX152R resin is 20% Glass fiber filled, high flow Polyimide blend with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 128 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 128 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 2.5 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 2.5 % ASTM D 638 Tensile Modulus, 5 mm/min 7100 MPa ASTM

S-Plastic Ultem ATX103R resin is 30% Glass fiber filled, high flow Polyimide blend with internal mold release. ECO Conforming, UL94 V0 and 5VA listing in recognized colors. ​Property TYPICAL PROPERTIES (1) MECHANICAL Value Unit Standard Tensile Stress, yld, Type I, 5 mm/min 132 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 132 MPa ASTM D 638 Tensile Strain, yld, Type I, 5 mm/min 2.7 % ASTM D 638 Tensile Strain, brk, Type I, 5 mm/min 2.7 % ASTM D 638 Tensile Modulus, 5