S-Plastic Thermocomp RF00ASXS resin is a compound based on Nylon 66 resin containing Glass Fiber

Name: S-Plastic Thermocomp RF00ASXS resin is a compound based on Nylon 66 resin containing Glass Fiber
Brand: SAMTION INTERNATIONAL LIMITED

Price Negotiable

Price: *USD

MOQ: 100KG

Delivery Time: To be negotiated

Brand: S-Plastic Thermocomp

Product Description

S-Plastics Thermocomp RF00ASXS resin is a compound based on Nylon 66 resin containing Glass Fiber. Added features of this material include:Heat Stabilized.

Property

MECHANICAL	Value	Unit	Standard
Tensile Stress, break, 5 mm/min	213	MPa	ISO 527
Tensile Strain, break, 5 mm/min	2.4	%	ISO 527
Tensile Modulus, 1 mm/min	15600	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	306	MPa	ISO 178
Flexural Modulus, 2 mm/min	11800	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact, unnotched 80104 +23°C	90	kJ/m²	ISO 180/1U
Izod Impact, notched 80104 +23°C	15	kJ/m²	ISO 180/1A
THERMAL	Value	Unit	Standard
HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm	260	°C	ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm	248	°C	ISO 75/Af
PHYSICAL	Value	Unit	Standard
Mold Shrinkage on Tensile Bar, flow (2)	0.1 - 0.3	%	S-Plastics Method
Density	1.58	g/cm³	ISO 1183
Source GMD, last updated:10/24/2006

Processing

(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
(2) Only typical data for selection purposes. Not to be used for part or tool design.
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(4) Internal measurements according to UL standards.
Disclaimer : All information, recommendation or advice given by S-Plastics Innovative Plastics, or any of its subsidiaries, affiliates or authorized representatives, wh written or oral, is given in good faith, to the best of its knowledge and based on current procedures in effect. Each user of the products shall convince himself, through all available sources (including finished product testing in its appropriate environment) of the suitability of the products supplied for its own particular purpose. Because actual use of the products by the user is beyond the control of S-Plastics Innovative Plastics Company, its subsidiaries and affiliates, such use is in the exclusive responsibility of the user. S-Plastics Innovative Plastics Company, its subsidiaries and affiliates