S-Plastic Thermocomp 2X00858 is a compound based on Fluorinated-Ethylene-Propylene (FEP) containing proprietary fillers.

Price Negotiable

Price: *USD

MOQ: 100KG

Delivery Time: To be negotiated

Brand: S-Plastic Thermocomp

Product Description

S-Plastics Thermocomp 2X00858 resin is is a compound based on Fluorinated-Ethylene-Propylene (FEP) containing proprietary fillers.

Property

TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 5 mm/min	14	MPa	ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min	12	MPa	ASTM D 638
Tensile Strain, yld, Type I, 5 mm/min	5.5	%	ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min	9.3	%	ASTM D 638
Tensile Modulus, 50 mm/min	1010	MPa	ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	20	MPa	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	790	MPa	ASTM D 790
Tensile Stress, yield, 5 mm/min	14	MPa	ISO 527
Tensile Stress, break, 5 mm/min	13	MPa	ISO 527
Tensile Strain, yield, 5 mm/min	6.1	%	ISO 527
Tensile Strain, break, 5 mm/min	9.3	%	ISO 527
Tensile Modulus, 1 mm/min	930	MPa	ISO 527
Flexural Stress	19	MPa	ISO 178
Flexural Modulus, 2 mm/min	870	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact, unnotched, 23°C	981	J/m	ASTM D 4812
Izod Impact, notched, 23°C	683	J/m	ASTM D 256
Izod Impact, unnotched 80104 +23°C	84	kJ/m²	ISO 180/1U
Izod Impact, notched 80104 +23°C	31	kJ/m²	ISO 180/1A
THERMAL	Value	Unit	Standard
HDT, 0.45 MPa, 3.2 mm, unannealed	79	°C	ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed	57	°C	ASTM D 648
HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm	80	°C	ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm	61	°C	ISO 75/Af
PHYSICAL	Value	Unit	Standard
Specific Gravity	2.17	-	ASTM D 792
Density	2.17	g/cm³	ASTM D 792
Moisture Absorption, 50% RH, 24 hrs	0.01	%	ASTM D 570
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Compliant, 94V-0 Flame Class Rating (3)(4)	1.5	mm	UL 94 by GE
Source GMD, last updated:2010/05/06

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION
(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours
storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
(2) Only typical data for selection purposes. Not to be used for part or tool design.
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(4) Internal measurements according to UL standards.
(5) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.