S-Plastic Thermocomp RF00AES is a compound based on PA66 resin containing Glass Fiber, Mold Release.

Price Negotiable

Price: *USD

MOQ: 100KG

Delivery Time: To be negotiated

Brand: S-Plastic Thermocomp

Product Description

S-Plastics Thermocomp RF00AES resin is a compound based on PA66 resin containing Glass Fiber, Mold Release.

Property

MECHANICAL	Value	Unit	Standard
Tensile Stress, break, 5 mm/min	210	MPa	ISO 527
Tensile Strain, break, 5 mm/min	2	%	ISO 527
Tensile Modulus, 1 mm/min	16000	MPa	ISO 527
Flexural Stress, break, 2 mm/min	310	MPa	ISO 178
Flexural Modulus, 2 mm/min	15000	MPa	ISO 178
Hardness, Rockwell L	114	-	ISO 2039-2
IMPACT	Value	Unit	Standard
Izod Impact, unnotched 80104 +23°C	55	kJ/m²	ISO 180/1U
Izod Impact, unnotched 80104 -30°C	45	kJ/m²	ISO 180/1U
Izod Impact, notched 80104 +23°C	13	kJ/m²	ISO 180/1A
Izod Impact, notched 80104 -20°C	12	kJ/m²	ISO 180/1A
Izod Impact, notched 80104 -30°C	11	kJ/m²	ISO 180/1A
Izod Impact, notched 80104 -40°C	11	kJ/m²	ISO 180/1A
THERMAL	Value	Unit	Standard
CTE, 23°C to 60°C, flow	1.2E-05	1/°C	ISO 11359-2
CTE, 23°C to 60°C, xflow	1.36E-04	1/°C	ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C	PASSES	-	IEC 60695-10-2
Vicat Softening Temp, Rate A/50	240	°C	ISO 306
Vicat Softening Temp, Rate B/50	230	°C	ISO 306
Vicat Softening Temp, Rate B/120	232	°C	ISO 306
HDT/Ae, 1.8 MPa Edgew 120104 sp=100mm	235	°C	ISO 75/Ae
PHYSICAL	Value	Unit	Standard
Mold Shrinkage on Tensile Bar, flow (2)	0.1 - 0.25	%	S-Plastics Method
Density	1.58	g/cm³	ISO 1183
Water Absorption, (23°C/sat)	2.75	%	ISO 62
Moisture Absorption (23°C / 50% RH)	0.85	%	ISO 62
ELECTRICAL	Value	Unit	Standard
Volume Resistivity	>1.E+16	Ohm-cm	IEC 60093
Surface Resistivity, ROA	>1.E+16	Ohm	IEC 60093
Dielectric Strength, in oil, 3.2 mm	19	kV/mm	IEC 60243-1
Relative Permittivity, 50/60 Hz	3.4	-	IEC 60250
Relative Permittivity, 1 MHz	3.2	-	IEC 60250
Dissipation Factor, 50/60 Hz	0.0068	-	IEC 60250
Dissipation Factor, 1 MHz	0.015	-	IEC 60250
Comparative Tracking Index	500	V	IEC 60112
Comparative Tracking Index, M	350	V	IEC 60112
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Recognized, 94HB Flame Class Rating (3)	0.75	mm	UL 94
UL Recognized, 94HB Flame Class Rating 2nd value (3)	3	mm	UL 94
Glow Wire Flammability Index 650°C, passes at	2	mm	IEC 60695-2-12
Oxygen Index (LOI)	27	%	ISO 4589
Source GMD, last updated:03/15/2005

Processing

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION
(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
(2) Only typical data for selection purposes. Not to be used for part or tool design.
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(4) Internal measurements according to UL standards.