S-Plastic Thermocomp EXCP0156 is a 50% carbon filled polyamide 6 resin with improved thermal conductivit
Price:
*USD
MOQ:
100KG
Delivery Time:
To be negotiated
Brand:
S-Plastic Thermocomp
Product Description
S-Plastics Thermocomp EXCP0156 resin is a 50% carbon filled polyamide 6 resin with improved thermal conductivity.
Property
| MECHANICAL | Value | Unit | Standard |
| Tensile Stress, break, 5 mm/min | 44 | MPa | ISO 527 |
| Tensile Strain, break, 5 mm/min | 1 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 7300 | MPa | ISO 527 |
| IMPACT | Value | Unit | Standard |
| Izod Impact, unnotched 80*10*4 +23°C | 10 | kJ/m² | ISO 180/1U |
| Izod Impact, notched 80*10*4 +23°C | 4 | kJ/m² | ISO 180/1A |
| THERMAL | Value | Unit | Standard |
| Vicat Softening Temp, Rate B/120 | 196 | °C | ISO 306 |
| PHYSICAL | Value | Unit | Standard |
| Density | 1.43 | g/cm³ | ISO 1183 |
| ELECTRICAL | Value | Unit | Standard |
| Surface Resistivity, ROA | 9.E+05 | Ohm | IEC 60093 |
| Source GMD, last updated:02/11/2003 | |||
Processing
Injection Molding Value Unit
Drying Temperature 75 - 85 °C
Drying Time 4 - 6 hrs
Maximum Moisture Content 0.2 %
Melt Temperature 250 - 280 °C
Nozzle Temperature 240 - 270 °C
Front - Zone 3 Temperature 250 - 280 °C
Middle - Zone 2 Temperature 250 - 280 °C
Rear - Zone 1 Temperature 250 - 280 °C
Hopper Temperature 60 - 80 °C
Mold Temperature 70 - 120 °C
Source GMD, last updated:02/11/2003
THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION
"(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours
storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded
samples. All samples tested under ISO test standards are prepared according to ISO 294."
(2) Only typical data for selection purposes. Not to be used for part or tool design.
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(4) Internal measurements according to UL standards.
Other related products we recommend:
|
For more information please download the datasheet |
|
 |
|
|
Get The Latest Quotation
First-level distribution source in South China Reduce procurement costs, improve supply stability, Help you find the most suitable engineering plastic materials
|
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
SAMTION INTERNATIONAL LIMITED
Location
Room 803B, 8/F., West Coast International Building, 290-296 Un Chau Street, Cheung Sha Wan, Kowloon, Hong Kong
Contact Person
Justin