S-Plastic Thermocomp FF006 is a glass filled Polyethylene.

Price Negotiable

Price: *USD

MOQ: 100KG

Delivery Time: To be negotiated

Brand: S-Plastic Thermocomp

Product Description

S-Plastics Thermocomp FF006 resin is FF-1006 is a glass filled Polyethylene.

Property

MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 5 mm/min	44	MPa	ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min	44	MPa	ASTM D 638
Tensile Strain, yld, Type I, 5 mm/min	1.5	%	ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min	1.5	%	ASTM D 638
Tensile Modulus, 50 mm/min	6660	MPa	ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	62	MPa	ASTM D 790
Flexural Stress, brk, 1.3 mm/min, 50 mm span	47	MPa	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	4210	MPa	ASTM D 790
Tensile Stress, yield, 5 mm/min	44	MPa	ISO 527
Tensile Stress, break, 5 mm/min	44	MPa	ISO 527
Tensile Strain, yield, 5 mm/min	1.4	%	ISO 527
Tensile Strain, break, 5 mm/min	1.4	%	ISO 527
Tensile Modulus, 1 mm/min	4580	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	64	MPa	ISO 178
Flexural Strain, break, 2 mm/min	2.1	%	ISO 178
Flexural Modulus, 2 mm/min	4940	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact, unnotched, 23°C	175	J/m	ASTM D 4812
Izod Impact, notched, 23°C	55	J/m	ASTM D 256
Izod Impact, unnotched 80104 +23°C	12	kJ/m²	ISO 180/1U
Izod Impact, notched 80104 +23°C	4	kJ/m²	ISO 180/1A
THERMAL	Value	Unit	Standard
HDT, 0.45 MPa, 3.2 mm, unannealed	130	°C	ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed	115	°C	ASTM D 648
CTE, -40°C to 40°C, flow	3.22E+00	1/°C	ASTM E 831
CTE, -40°C to 40°C, xflow	1.25E+01	1/°C	ASTM E 831
CTE, 23°C to 60°C, flow	3.22E+00	1/°C	ISO 11359-2
CTE, 23°C to 60°C, xflow	1.25E+01	1/°C	ISO 11359-2
HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm	129	°C	ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm	111	°C	ISO 75/Af
PHYSICAL	Value	Unit	Standard
Density	1.18	g/cm³	ASTM D 792
Moisture Absorption, 50% RH, 24 hrs	0.02	%	ASTM D 570
Mold Shrinkage, flow, 24 hrs	0.4 - 0.7	%	ASTM D 955
Mold Shrinkage, xflow, 24 hrs	1 - 3	%	ASTM D 955
Density	1.18	g/cm³	ISO 1183
Moisture Absorption (23°C / 50% RH)	0.03	%	ISO 62
Source GMD, last updated:03/26/2008

Processing

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.

PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION

(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours
storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded
samples. All samples tested under ISO test standards are prepared according to ISO 294.

(2) Only typical data for selection purposes. Not to be used for part or tool design.

(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.

(4) Internal measurements according to UL standards.

Other related products we recommend: