S-Plastic Thermocomp GC006XXZ PEI, Carbon Fiber,

Price Negotiable

Price: *USD

MOQ: 100KG

Delivery Time: To be negotiated

Brand: S-Plastic Thermocomp

Product Description

S-Plastics Thermocomp GC006XXZ resin is PEI, Carbon Fiber,

Property

MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 5 mm/min	104	MPa	ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min	137	MPa	ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min	0.7	%	ASTM D 638
Tensile Modulus, 50 mm/min	35160	MPa	ASTM D 638
Flexural Stress, brk, 1.3 mm/min, 50 mm span	191	MPa	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	16130	MPa	ASTM D 790
Tensile Stress, break, 5 mm/min	136	MPa	ISO 527
Tensile Strain, break, 5 mm/min	1.2	%	ISO 527
Tensile Modulus, 1 mm/min	21540	MPa	ISO 527
Flexural Modulus, 2 mm/min	16250	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact, unnotched, 23°C	390	J/m	ASTM D 4812
Izod Impact, notched, 23°C	69	J/m	ASTM D 256
Izod Impact, unnotched 80104 +23°C	23	kJ/m²	ISO 180/1U
Izod Impact, notched 80104 +23°C	5	kJ/m²	ISO 180/1A
THERMAL	Value	Unit	Standard
HDT, 0.45 MPa, 3.2 mm, unannealed	184	°C	ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed	178	°C	ASTM D 648
CTE, -40°C to 40°C, flow	2.E+01	1/°C	ASTM E 831
CTE, -40°C to 40°C, xflow	3.29E+01	1/°C	ASTM E 831
HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm	186	°C	ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm	181	°C	ISO 75/Af
PHYSICAL	Value	Unit	Standard
Density	1.37	g/cm³	ASTM D 792
Moisture Absorption, 50% RH, 24 hrs	0.15	%	ASTM D 570
Mold Shrinkage, flow, 24 hrs	0.04 - 0.06	%	ASTM D 955
Mold Shrinkage, xflow, 24 hrs	0.25 - 0.4	%	ASTM D 955
Density	1.37	g/cm³	ISO 1183
Moisture Absorption (23°C / 50% RH)	0.15	%	ISO 62
Source GMD, last updated:02/04/2008

Injection Molding	Value	Unit
Drying Temperature	120 - 150	°C
Drying Time	4	hrs
Maximum Moisture Content	0.05	%
Melt Temperature	360 - 370	°C
Front - Zone 3 Temperature	350 - 360	°C
Middle - Zone 2 Temperature	340 - 350	°C
Rear - Zone 1 Temperature	325 - 340	°C
Mold Temperature	150	°C
Back Pressure	0.2 - 0.3	MPa
Screw Speed	30 - 60	rpm
Source GMD, last updated:02/04/2008
THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION
(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
(2) Only typical data for selection purposes. Not to be used for part or tool design.
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(4) Internal measurements according to UL standards.