S-Plastic Lubricomp EX07305 Polyimide reinforced with Glass fiber and PTFE for use in Burn-in Test Sockets (BiTS) Appli
S-Plastics Lubricomp EX07305 resin is
| TYPICAL PROPERTIES (1) | |||
| MECHANICAL | Value | Unit | Standard |
| Tensile Stress, yld, Type I, 5 mm/min | 0 | MPa | ASTM D 638 |
| Tensile Stress, brk, Type I, 5 mm/min | 157 | MPa | ASTM D 638 |
| Tensile Strain, yld, Type I, 5 mm/min | 0 | % | ASTM D 638 |
| Tensile Strain, brk, Type I, 5 mm/min | 3 | % | ASTM D 638 |
| Tensile Modulus, 50 mm/min | 8620 | MPa | ASTM D 638 |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 202 | MPa | ASTM D 790 |
| Flexural Stress, brk, 1.3 mm/min, 50 mm span | 201 | MPa | ASTM D 790 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 6420 | MPa | ASTM D 790 |
| Tensile Stress, yield, 5 mm/min | 0 | MPa | ISO 527 |
| Tensile Stress, break, 5 mm/min | 156 | MPa | ISO 527 |
| Tensile Strain, yield, 5 mm/min | 0 | % | ISO 527 |
| Tensile Strain, break, 5 mm/min | 1.2 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 8540 | MPa | ISO 527 |
| Flexural Modulus, 2 mm/min | 7210 | MPa | ISO 178 |
| IMPACT | Value | Unit | Standard |
| Izod Impact, unnotched, 23°C | 329 | J/m | ASTM D 4812 |
| Izod Impact, notched, 23°C | 67 | J/m | ASTM D 256 |
| Izod Impact, unnotched 80*10*4 +23°C | 25 | kJ/m² | ISO 180/1U |
| Izod Impact, notched 80*10*4 +23°C | 7 | kJ/m² | ISO 180/1A |
| THERMAL | Value | Unit | Standard |
| HDT, 1.82 MPa, 3.2mm, unannealed | 204 | °C | ASTM D 648 |
| CTE, -40°C to 40°C, flow | 1.41E-05 | 1/°C | ASTM E 831 |
| CTE, -40°C to 40°C, xflow | 5.07E-05 | 1/°C | ASTM E 831 |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 206 | °C | ISO 75/Af |
| PHYSICAL | Value | Unit | Standard |
| Density | 1.506 | g/cm³ | ASTM D 792 |
| Mold Shrinkage, flow | 0.4 | % | S-Plastics Method |
| Mold Shrinkage, xflow | 0.52 | % | S-Plastics Method |
| Wear Factor Washer | 15 | 10^-10 in^5-min/ft-lb-hr | ASTM D 3702 Modified |
| Dynamic COF | 0.52 | - | ASTM D 3702 Modified |
| Density | 1.51 | g/cm³ | ISO 1183 |
| ELECTRICAL | Value | Unit | Standard |
| Volume Resistivity | 7.6E+16 | Ohm-cm | ASTM D 257 |
| Surface Resistivity | 2.E+13 | Ohm | ASTM D 257 |
| Dielectric Strength, in oil, 1.6 mm | 31.4 | kV/mm | ASTM D 149 |
| Relative Permittivity, 100 kHz | 3.3 | - | ASTM D 150 |
| Dissipation Factor, 100 kHz | 0.0031 | - | ASTM D 150 |
| Source GMD, last updated:07/03/2008 | |||
Processing
| Parameter | |||
| Injection Molding | Value | Unit | |
| Drying Temperature | 150 | °C | |
| Drying Time | 4 - 6 | hrs | |
| Drying Time (Cumulative) | 24 | hrs | |
| Maximum Moisture Content | 0.02 | % | |
| Melt Temperature | 350 - 400 | °C | |
| Nozzle Temperature | 345 - 400 | °C | |
| Front - Zone 3 Temperature | 345 - 400 | °C | |
| Middle - Zone 2 Temperature | 340 - 400 | °C | |
| Rear - Zone 1 Temperature | 330 - 400 | °C | |
| Mold Temperature | 135 - 165 | °C | |
| Back Pressure | 0.3 - 0.7 | MPa | |
| Screw Speed | 40 - 70 | rpm | |
| Shot to Cylinder Size | 40 - 60 | % | |
| Vent Depth | 0.025 - 0.076 | mm | |
| Source GMD, last updated:07/03/2008 | |||
Our customers
In recent years, we have deeply cultivated the domestic market and actively explored foreign markets.Up to now, we have provided high-quality products and services to more than 1,000 customers in various industries, including: electronics and electrical appliances, medical, food, automotive electronics, optoelectronic communications, photovoltaic new energy, water treatment, transportation and other industries.
Samtion chemical supplies engineering plastics and special modified materials of S-Plastics and other brands.Our authentic products are guaranteed, with complete qualifications and superior supply capacity and price advantages.
Every batch of our products is subject to strict quality inspection to ensure the original supply. All products have MSDS, ROHS, SGS, REACH, FDA, EU, UL, COC / COA certificates!!
Other related products we recommend:
|
For more information please download the datesheet |
|
 |
|
|
Get The Latest Quotation
First-level distribution source in South China Reduce procurement costs, improve supply stability, Help you find the most suitable engineering plastic materials
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.