S-Plastic Stat-kon Valox_EXCP0216 SINGLE LOT DATA. 45% carbon filled PBT. High modulus, flame resistant, electrically/therma

Price Negotiable

Price: *USD

MOQ: 100KG

Delivery Time: To be negotiated

Brand: S-Plastic Stat-kon

Product Description

S-Plastics Stat-kon Valox_EXCP0216 resin is SINGLE LOT DATA. 45% carbon filled PBT. High modulus, flame resistant, electrically/thermally conductive. Automotive heat
sinks/spreaders, fans.

Property

TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 5 mm/min	88	MPa	ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min	88	MPa	ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min	1.5	%	ASTM D 638
Flexural Stress, brk, 1.3 mm/min, 50 mm span	127	MPa	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	22800	MPa	ASTM D 790
IMPACT	Value	Unit	Standard
Izod Impact, unnotched, 23°C	133	J/m	ASTM D 4812
Izod Impact, notched, 23°C	21	J/m	ASTM D 256
Instrumented Impact Total Energy, 23°C	5	J	ASTM D 3763
THERMAL	Value	Unit	Standard
HDT, 1.82 MPa, 3.2mm, unannealed	189	°C	ASTM D 648
Thermal Conductivity	1.2	W/m-°C	ISO 8302
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.66	-	ASTM D 792
ELECTRICAL	Value	Unit	Standard
Volume Resistivity	1.E+01	Ohm-cm	IEC 60093
Surface Resistivity, ROA	1.E+05	Ohm	IEC 60093
Source GMD, last updated:07/29/2002

Processing

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION
(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
(2) Only typical data for selection purposes. Not to be used for part or tool design.
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(4) Internal measurements according to UL standards.