S-Plastic Geloy EXGY0026 Granite-look VFx extrusion product

Price Negotiable

Price: *USD

MOQ: 100KG

Delivery Time: To be negotiated

Brand: S-Plastic Geloy

Product Description

S-Plastics Geloy EXGY0026 resin is Granite-look VFx extrusion product

Property

TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 50 mm/min	54	MPa	ASTM D 638
Tensile Stress, brk, Type I, 50 mm/min	54	MPa	ASTM D 638
Tensile Strain, yld, Type I, 50 mm/min	2.4	%	ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min	2.4	%	ASTM D 638
Tensile Modulus, 5 mm/min	2730	MPa	ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	89	MPa	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	2790	MPa	ASTM D 790
Tensile Stress, yield, 50 mm/min	55	MPa	ISO 527
Tensile Stress, break, 50 mm/min	55	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	3.8	%	ISO 527
Tensile Strain, break, 50 mm/min	3.8	%	ISO 527
Tensile Modulus, 1 mm/min	2700	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	90	MPa	ISO 178
Flexural Modulus, 2 mm/min	2810	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact, notched, 23°C	26	J/m	ASTM D 256
Izod Impact, notched 80104 +23°C	2	kJ/m²	ISO 180/1A
THERMAL	Value	Unit	Standard
HDT, 1.82 MPa, 3.2mm, unannealed	73	°C	ASTM D 648
Vicat Softening Temp, Rate B/120	91	°C	ISO 306
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm	75	°C	ISO 75/Af
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.16	-	ASTM D 792
Melt Flow Rate, 200°C/3.8 kgf	0.4	g/10 min	ASTM D 1238
Density	1.16	g/cm³	ISO 1183
Melt Volume Rate, MVR at 220°C/5.0 kg	3	cm³/10 min	ISO 1133
Source GMD, last updated:02/16/2005

• Recommend initial lower temperatures settings to avoid material degradation/hang-up in die.
Parameter
Sheet Extrusion	Value	Unit
Drying Temperature	80 - 95	°C
Drying Time	4	hrs
Maximum Moisture Content	0 - 0.02	%
Melt Temperature	215 - 260	°C
Barrel - Zone 1 Temperature	170 - 200	°C
Barrel - Zone 2 Temperature	180 - 220	°C
Barrel - Zone 3 Temperature	190 - 225	°C
Barrel - Zone 4 Temperature	200 - 240	°C
Adapter Temperature	205 - 250	°C
Die Temperature	205 - 250	°C
Roll Stack Temp - Top	90 - 95	°C
Roll Stack Temp - Middle	95 - 105	°C
Roll Stack Temp - Bottom	100 - 105	°C
Source GMD, last updated:02/16/2005