S-Plastic Geloy EXGY0062 Experimental Polycarbonate ASA blend injection molding applications to provide low gloss surface

Price Negotiable

Price: *USD

MOQ: 100KG

Delivery Time: To be negotiated

Brand: S-Plastic Geloy

Product Description

S-Plastics Geloy EXGY0062 resin is Experimental Polycarbonate/ASA blend for injection molding applications to provide low gloss surface

Property

TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Tensile Stress, yield, 50 mm/min	56	MPa	ISO 527
Tensile Stress, break, 50 mm/min	46	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	4	%	ISO 527
Tensile Strain, break, 50 mm/min	35	%	ISO 527
Tensile Modulus, 1 mm/min	2800	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	87	MPa	ISO 178
Flexural Modulus, 2 mm/min	2500	MPa	ISO 178
IMPACT	Value	Unit	Standard
Instrumented Impact Total Energy, 23°C	20	J	ASTM D 3763
Izod Impact, notched 80104 +23°C	28	kJ/m²	ISO 180/1A
Charpy 23°C, V-notch Edgew 80104 sp=62mm	25	kJ/m²	ISO 179/1eA
THERMAL	Value	Unit	Standard
CTE, -40°C to 40°C, flow	7.2E-05	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	7.2E-05	1/°C	ISO 11359-2
Vicat Softening Temp, Rate B/50	115	°C	ISO 306
Vicat Softening Temp, Rate B/120	111	°C	ISO 306
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm	95	°C	ISO 75/Af
PHYSICAL	Value	Unit	Standard
Melt Flow Rate, 220°C/10.0 kgf	4.6	g/10 min	ASTM D 1238
Melt Flow Rate, 260°C/5.0 kgf	14.1	g/10 min	ASTM D 1238
Melt Viscosity, 260°C, 1000 sec-1	2750	poise	ASTM D 3825
Density	1.15	g/cm³	ISO 1183
Source GMD, last updated:2009/07/21

• May be used in co-extrusion or monolayer.
Parameter
Sheet Extrusion	Value	Unit
Drying Temperature	90 - 100	°C
Drying Time	3 - 4	hrs
Drying Time (Cumulative)	8	hrs
Minimum Moisture Content	0.04	%
Melt Temperature	260 - 280	°C
Barrel - Zone 1 Temperature	225 - 240	°C
Barrel - Zone 2 Temperature	240 - 250	°C
Barrel - Zone 3 Temperature	250 - 260	°C
Barrel - Zone 4 Temperature	260 - 270	°C
Adapter Temperature	260 - 270	°C
Die Temperature	260 - 270	°C
Roll Stack Temp - Top	100 - 120	°C
Roll Stack Temp - Middle	95 - 110	°C
Roll Stack Temp - Bottom	75 - 90	°C
Source GMD, last updated:2009/07/21