S-Plastic Geloy GY1226 ASA/PVC pellets for capstock profile extrusion. Suitable for outdoor unpainted applications

Name: S-Plastic Geloy GY1226 ASA/PVC pellets for capstock profile extrusion. Suitable for outdoor unpainted applications
Brand: SAMTION INTERNATIONAL LIMITED

Price Negotiable

Price: *USD

MOQ: 100KG

Delivery Time: To be negotiated

Brand: S-Plastic Geloy

Product Description

S-Plastics Geloy GY1226 resin is ASA/PVC pellets for capstock profile extrusion. Suitable for outdoor unpainted applications. Available in dark colors only.

Property

TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 50 mm/min	45	MPa	ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min	70	%	ASTM D 638
Tensile Modulus, 50 mm/min	2890	MPa	ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	64	MPa	ASTM D 790
Flexural Stress, yld, 2.6 mm/min, 100 mm span	63	MPa	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	2270	MPa	ASTM D 790
Hardness, Rockwell R	100	-	ASTM D 785
IMPACT	Value	Unit	Standard
Izod Impact, notched, 23°C	1068	J/m	ASTM D 256
Izod Impact, notched, -30°C	106	J/m	ASTM D 256
Gardner, 23°C	24	J	ASTM D 3029
Gardner Impact (Procedure B)	8006	J/m	ASTM D 4226
Gardner, -30°C	10	J	ASTM D 3029
Instrumented Impact Total Energy, 23°C	55	J	ASTM D 3763
Instrumented Impact Total Energy, -30°C	54	J	ASTM D 3763
THERMAL	Value	Unit	Standard
HDT, 1.82 MPa, annealed	84	°C	ASTM D 648
HDT, 0.45 MPa, 6.4 mm, unannealed	85	°C	ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed	71	°C	ASTM D 648
CTE, -40°C to 40°C, flow	8.46E-05	1/°C	ASTM E 831
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.21	-	ASTM D 792
Water Absorption, 24 hours	0.11	%	ASTM D 570
Melt Flow Rate, 200°C/3.8 kgf	7	g/10 min	ASTM D 1238
OPTICAL	Value	Unit	Standard
Gloss, untextured, 60 degrees	70	-	ASTM D 523
ELECTRICAL	Value	Unit	Standard
Volume Resistivity	1.8E+16	Ohm-cm	ASTM D 257
Surface Resistivity	1.8E+15	Ohm	ASTM D 257
Dielectric Strength, in air, 3.2 mm	18.7	kV/mm	ASTM D 149
Relative Permittivity, 100 Hz	3.5	-	ASTM D 150
Dissipation Factor, 100 Hz	0.0021	-	ASTM D 150
Source GMD, last updated:10/04/1999

Processing

Parameter
Extrusion	Value	Unit
Drying Temperature	80 - 90	°C
Drying Time	3 - 4	hrs
Minimum Moisture Content	0.04	%
Melt Temperature	180 - 200	°C
Barrel - Zone 1 Temperature	170 - 180	°C
Barrel - Zone 2 Temperature	175 - 190	°C
Barrel - Zone 3 Temperature	180 - 195	°C
Die Temperature	175 - 180	°C
Roll Stack Temperature - Top	175 - 180	°C
Roll Stack Temperature - Middle	175 - 180	°C
Roll Stack Temperature - Bottom	180 - 190	°C
Source GMD, last updated:10/04/1999