S-Plastic Geloy XP2003 ASA+PVC alloy. Excellent weatherability.

Price Negotiable

Price: *USD

MOQ: 100KG

Delivery Time: To be negotiated

Brand: S-Plastic Geloy

Product Description

S-Plastics Geloy XP2003 resin is ASA+PVC alloy. Excellent weatherability.

Property

TYPICAL PROPERTIES (1)
MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 50 mm/min	38	MPa	ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min	30	%	ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	48	MPa	ASTM D 790
Flexural Stress, yld, 2.6 mm/min, 100 mm span	51	MPa	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	1930	MPa	ASTM D 790
Flexural Modulus, 2.6 mm/min, 100 mm span	1580	MPa	ASTM D 790
Hardness, Rockwell R	102	-	ASTM D 785
IMPACT	Value	Unit	Standard
Izod Impact, notched, 23°C	961	J/m	ASTM D 256
Izod Impact, notched, -30°C	106	J/m	ASTM D 256
Gardner, 23°C	33	J	ASTM D 3029
Gardner, -30°C	10	J	ASTM D 3029
Instrumented Impact Total Energy, 23°C	56	J	ASTM D 3763
Instrumented Impact Total Energy, -30°C	28	J	ASTM D 3763
THERMAL	Value	Unit	Standard
HDT, 0.45 MPa, 6.4 mm, unannealed	82	°C	ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed	73	°C	ASTM D 648
CTE, -40°C to 95°C, flow	8.46E-05	1/°C	ASTM E 831
Relative Temp Index, Elec	50	°C	UL 746B
Relative Temp Index, Mech w/impact	50	°C	UL 746B
Relative Temp Index, Mech w/o impact	50	°C	UL 746B
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.21	-	ASTM D 792
Water Absorption, 24 hours	0.11	%	ASTM D 570
Mold Shrinkage, flow, 3.2 mm	0.3 - 0.5	%	S-Plastics Method
Melt Flow Rate, 200°C/3.8 kgf	4.5	g/10 min	ASTM D 1238
OPTICAL	Value	Unit	Standard
Gloss, untextured, 60 degrees	90	-	ASTM D 523
ELECTRICAL	Value	Unit	Standard
Volume Resistivity	7.2E+14	Ohm-cm	ASTM D 257
Surface Resistivity	1.2E+15	Ohm	ASTM D 257
Dielectric Strength, in air, 3.2 mm	18.6	kV/mm	ASTM D 149
Dielectric Strength, in oil, 1.6 mm	32	kV/mm	ASTM D 149
Relative Permittivity, 100 Hz	3.54	-	ASTM D 150
Dissipation Factor, 100 Hz	0.0031	-	ASTM D 150
Arc Resistance, Tungsten {PLC}	6	PLC Code	ASTM D 495
Hot Wire Ignition {PLC)	0	PLC Code	UL 746A
High Voltage Arc Track Rate {PLC}	2	PLC Code	UL 746A
High Ampere Arc Ign, surface {PLC}	0	PLC Code	UL 746A
Comparative Tracking Index (UL) {PLC}	3	PLC Code	UL 746A
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Recognized, 94HB Flame Class Rating (3)	1.47	mm	UL 94
UL Recognized, 94V-1 Flame Class Rating (3)	3.3	mm	UL 94
UL Recognized, 94-5VA Rating (3)	3.3	mm	UL 94
Source GMD, last updated:01/05/2000

Processing

Parameter
Injection Molding	Value	Unit
Drying Temperature	65 - 70	°C
Drying Time	2 - 3	hrs
Drying Time (Cumulative)	3	hrs
Maximum Moisture Content	0.04	%
Melt Temperature	195 - 210	°C
Nozzle Temperature	190 - 205	°C
Front - Zone 3 Temperature	180 - 195	°C
Middle - Zone 2 Temperature	170 - 190	°C
Rear - Zone 1 Temperature	165 - 175	°C
Mold Temperature	25 - 60	°C
Back Pressure	0.3 - 0.7	MPa
Screw Speed	30 - 80	rpm
Shot to Cylinder Size	40 - 80	%
Vent Depth	0.038 - 0.076	mm
Source GMD, last updated:01/05/2000