J10 Audio Power Amplifier 482x 44x460mm 12kg With Power Supply Under Voltage Protection

Output Power:
8Ω Stereo Power: 4X1000W 4Ω Stereo Power: 4X1700W
2Ω Stereo Power: 4X2890W
16Ω ohm bridge power: 2X2000W 8Ω ohm bridge power: 2X3400W
4Ω bridge power: 2X5780W
RMS output voltage (THD=1%, 1KHz); 89.41V;
Rising slope (1KHz bypass low filter): 50V/us;
Input sensitivity (rated output power, 1KHz): optional: | 35dB, 32dB, 29dB, 26dB;
THD+N (10% rated output power, typical value): 0.01%;
IMD-SMPTE (10% rated output power, typical value): 0.01%;
DIM30 (10% rated output power, typical value): 0.01%;
Crosstalk suppression: (below rated power, 50Hz ~ 1KHz≥90dB;
Frequency response: (10% rated output power, 8Q, 20Hz~20kHz): ± 0.2dB;
Input impedance: __20kΩ (balanced), 10kQΩ (unbalanced);
Damping coefficient: (8 days, 20Hz~200Hz): ≥5000;
Power gain options: 23, 26, 29, 32, 35, 38, 41, 44dB
Signal-to-noise ratio: (A-weighted, 20Hz~20kHz): ≥ 109dB;
Power requirements: 90~260VAC, 50~60 Hz;
Protective function:
Power supply under-voltage protection, power amplifier output DC protection, overheating protection, temperature power control,
Overload power control;
Dimensions and net weight: 482 x 44 x 460mm, 12kg.