Pneumatic Brake 5 Axis CNC Machine Rotary Table Tjr Tilting Index
Pneumatic Brake 5axis Rotary Table CNC Machine Tjr Tilting Index Table Turntable
Product Introduction
High rigidity
Using radial-axial bearings which easily bear heavy cutting
High precision
Usineg Japan made dual-lead worm and worm gear which ia wear-proof and stable.
High value
Adopting large hole diameter desige which not only provide bigger space for work piece setup with fixtures but also deliver high rigidity.
high aesthetic appearnce
using endurable finish,shining with pearlescent and silver
FHR(s)-255CL Five-axis machining centers can also reduce benchmark conversion and improve machining accuracy. In actual machining, only one clamping is required, making it easier to ensure machining accuracy. At the same time, due to the shortening of the process chain and the reduction in the number of equipment, the number of fixtures, workshop area, and equipment maintenance costs of the five-axis machining center have also decreased. This means that you can use fewer fixtures, less plant area, and maintenance costs to achieve more efficient and high-quality processing!
Product parameters
| Item | Unit | FHR(s)-255C /255CL | ||
| Table Diameter | mm | Ø 255 | ||
|
Diameter of center hole on disk surface |
mm | Ø 110 | ||
| Inner Diameter of Mandrel Sleeve | mm | Ø 80H7 | ||
| Diameter of Center Through Hole | mm | Ø 80 | ||
| Table Height (Horizontal) | mm | 290 | ||
| Table T-slot Width | mm | 12H7 | ||
| Guide Block Width | mm | 18h7 | ||
| Axis | - | Rotary axis | Tilt axis±110º | |
| Transmission Mechanism | deg. | 0.001 | 0.001 | |
|
segmentation precision |
sec. | 15 | 60 *¹ | |
| Repeatability | sec. | 6 | 8 | |
| Clamping System | kg/cm2 | 35 | 35 | |
| Clamping Torque | kg-m | 70 | 140 | |
| Servo Motor Model | FANUC |
Axis taper/Straight axis |
αiF4 / αiF8 / αiS12 / ßiS8(Type) | αiF8 / αiS12 / ßiS12(Type) |
| Mitsubishi | Straight axis | HG/HF-104 | HG/HF-154 | |
| Speed Reduction Ratio | - | 0.125 | 0.125 | |
| Max. Rotation Rate of Table (Calculate with FANUC α Motor) |
r.p.m | 33.3 * (25) | 16.6 * (11.1) | |
| Allowable Inertia Load Capacity (Horizontal) | kg.cm.sec2 | 8.13 | ||
| Allowable Workpiece Load (dynamic) | 0º Horizontal | kg | 100 | |
| 0º~90º Tilt | kg | 75 | ||
| Allowable Load (with clamping) |
F | kgf | 1500 | |
| FxL | kgf.m | 140 | ||
| FxL | kgf.m | 70 | ||
| (Rotary axis)Strength of Roller Gear Cam | kg.m | 55 *(31) | ||
| Net Weight (servo motor excluded) | kg | 296(Ø255C) / 312(Ø255CL) | ||
Detail drawing
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.