Forward Out Hydraulic Metal Baler Machine 1350kN Aluminum Scrap Baler​

The Y83Q-135 Front-out Metal Baler is a practical hydraulic metal baler designed for scrap metal recycling yards, metal processing factories, waste material collection centers, and small to medium scrap handling sites. It is mainly used to cold press scrap steel, scrap iron, light metal offcuts, aluminum scrap, copper scrap, and other compressible metal waste into compact rectangular bales.

This model is equipped with 1350kN nominal force, a 1300×600×600mm compression chamber, and a bale size of 50–300×600×240mm. The bale density can reach more than 1800kg/m³, helping customers improve storage efficiency, reduce transport cost, and make scrap handling easier.

The Y83Q-135 uses front-out bale discharge and hand valve control. The structure is simple, operation is direct, and maintenance is convenient. With 18.5kW power, this scrap metal baler machine offers a good balance between compression performance and energy consumption.

Cause

Many small and medium recycling companies do not only face the problem of scrap volume. The real challenge is that loose scrap metal takes too much space, is difficult to load, and increases handling cost.

Uncompressed scrap metal often causes several problems:

Loose scrap occupies too much yard space
Truck loading efficiency is low
Manual handling takes more time and labor
Transportation cost increases
Irregular scrap shape affects downstream processing
Inventory turnover becomes slower

For companies that process scrap metal every day, a suitable hydraulic scrap baler can greatly improve yard management and recycling efficiency.

Solution

The Y83Q-135 hydraulic metal baler uses hydraulic pressure to compress loose scrap metal into dense and regular bales. After baling, the material becomes easier to stack, move, load, transport, and sell.

The front-out discharge structure allows the finished bale to be pushed out from the front side, which is suitable for customers with limited working space. The hand valve control system is easy to operate and practical for daily recycling work.

For customers processing light scrap steel, scrap iron, metal offcuts, and non-ferrous metal scrap, the Y83Q-135 provides a reliable solution with suitable capacity, good bale density, simple operation, and reasonable investment cost.

Specifications

Application

The Y83Q-135 metal baler is suitable for many scrap metal recycling and compression applications.

It can be used in scrap recycling yards for scrap steel, scrap iron, and mixed metal waste.
It is suitable for metal processing factories to handle offcuts, stamping waste, and cutting waste.
It can help waste material collection centers compress loose scrap into transportable bales.
It is also suitable for aluminum scrap, copper scrap, and other compressible non-ferrous materials.
It can help small and medium steel processing companies reduce scrap storage pressure.

This front-out metal baler is especially suitable for customers who need a simple, stable, and easy-to-operate baling machine.

How It Works

During operation, scrap metal is loaded into the compression chamber. After the hydraulic system starts, the cylinder drives the pressing head to compress the material into a compact rectangular bale. Once the bale is formed, it is discharged from the front side for easy collection and handling.

The machine works by cold pressing, without heating the material. The hydraulic system provides stable pressure, while the hand valve control makes operation clear and direct. The main value of the machine is to turn loose, irregular, and difficult-to-transport scrap into high-density standard bales.

How To Choose

When choosing a hydraulic metal baler, buyers should consider scrap type, daily processing volume, bale size requirement, site layout, and operation preference.

If the main materials are light scrap steel, scrap iron, offcuts, aluminum scrap, or copper scrap, and the required capacity is around 1800–2500kg/h, the Y83Q-135 is a suitable option.

If the customer needs simple operation and easy maintenance, hand valve control is practical.
If the working space is limited, front-out discharge can make bale removal more convenient.
If transport efficiency is important, bale density and bale section size should be considered carefully.
If the scrap is thicker or the daily processing volume is higher, a larger hydraulic metal baler may be recommended.

WANSHIDA has more than 40 years of manufacturing experience in hydraulic recycling machinery. With our own factory and professional engineering team, we can provide customized solutions according to scrap type, local voltage, bale size requirement, and working site conditions.

FAQ

Q1: What materials can the Y83Q-135 process?

It can process scrap steel, scrap iron, metal offcuts, light metal scrap, aluminum scrap, copper scrap, and other compressible scrap metal materials. Final suitability depends on material thickness, hardness, and shape.

Q2: What is the bale size?

The bale size is 50–300×600×240mm. The actual bale length may vary depending on material type, feeding amount, and compression condition.

Q3: What is the advantage of front-out discharge?

Front-out discharge provides a clear bale discharge direction and is convenient for customers with limited working space. It also makes bale collection and transfer easier.

Q4: Is the machine automatic or manual?

This model uses hand valve control. It is simple, practical, and suitable for small and medium recycling yards and metal processing factories.

Q5: Can voltage and configuration be customized?

Yes. Voltage, frequency, and certain configurations can be customized according to the customer’s local requirements and working conditions.

After-Sales Service

We provide complete after-sales support for the Y83Q-135 hydraulic metal baler, including installation guidance, operation training, maintenance suggestions, spare parts supply, and long-term technical support.

One year guarantee and lifelong maintenance support are provided.
Remote video guidance and technical communication are available.
Regular spare parts such as seals, hydraulic components, and electrical parts can be supplied.
Machine operation and maintenance suggestions can be provided according to customer site conditions.
If any problem occurs, customers can contact us directly by phone, email, or online communication.

We provide not only machines, but also practical recycling baler solutions based on real customer working conditions.