5D Maxlipo Lipolaser Slimming Red Light Therapy Machine 650nm 940nm
5D Maxlipo Lipolaser Slimming Red Therapy Light Machine 5D Maxlipo 650nm 940nm
Theory of 5D maxlipo laser machine
The Maxlipo Light delivers both 650nm and 940nm light via high-powered, German-made, surface mount microchip lamps that are imbedded in a soft and flexible pad. The pads can be easily applied to any area of the body. Because of the Maxlipo Light’s proprietary reflective coating, the light that would normally bounce off the skin is reflected back, resulting in a much higher retention of light energy than with other similar devices. No other system has this reflective coating. A Maxlipo Light session is pain-free, with no heat or discomfort, and is safe to operate for both the customer and the technician.
Unlike ultrasound, radio frequency, laser light and freezing, the system do not cause cellular damage. Quite the opposite, non-invasive Maxlipo Light has been shown to promote a natural response within cells based on the wavelength of the light energy used and the type of cell it reaches. Dual wavelengths(650nm and 940nm) have been used in a wide range of therapies that promote some form of healing response.
The design of the Maxlipo Light pads that allow for better light delivery and retention within the tissue has been clinically proven to provide a superior result with consistent treatment outcomes. No other pad-based device can make these claims.
Application of 5D maxlipo laser machine
The Maxlipo Light is used as a non-invasive dermatological aesthetic treatment for the reduction of circumference of the hips, waist and thighs. 650nm and 940nm(invisible light) stimulate the lymph drainage and reduce the cellulite, and the 940nm light penetrates deeper into adipose tissue.
It is also for the temporary relief of minor muscle and joint pain, arthritis, muscle spasms, relieving stiffness, promoting the relaxation of muscle tissue and to temporarily increase local blood circulation.
Parameters of 5D maxlipo laser machine
| Wavelength | 650nm, 940nm |
| Lamp Source | Imported chips for assemble |
| Lamp Type | Low intensity diode |
| Quantities of Lamps | 1086pcs with 5 pcs Light pads |
| Each Lamp Energy | 200MW |
| Working Mode | Continuous and Pulse |
| Treatment Pads | 5pcs (1 large, 2 medium, 2 small) |
| Touch Screen | 8 inch Touch Screen |
| Cooling System | Air Cooled |
| Voltage | 100-130V/200V-230V; 50Hz-60Hz |
| Safety | On Board Diagnostics |
| Classification | Electrical Class Ⅱ, Type B applied part |
| Ingress Rating | IPXO |
| Environmental Requirement | 10.C to 40.C. Non-condensing humidities below 75% RH |
| CE | CE with LVD and EMC |
| Machine Packing Size | 40cm*39cm*31cm |
| Cart Package size | 66*62cm*42cm |
| G. W. | Host:6KG; Cart and Pads:15kg |
| Input Power | ≤300W |
Operation of 5D maxlipo laser machine
Place the treatment pads flat on your treatment table with the lamps facing up.
The 5 pads can be placed on different body parts.
| Treatment Pad | Quantity of Lamps | Treatment Area | Treatment Site |
| 1 Big Pad | 336 | 72cm*31cm | waist/abdomen/buttock/back, etc |
| 2 Mid Pads | 231*2 | 56cm*26cm | legs/buttock, etc |
| 2 Small Pads | 144*2 | 43cm*19cm | arms and neck, etc |
Choose the treatment areas, adjust the energy and treatment time according to the customers.
The system will stop automatically if the setting time is over.
Please turn off the general power button and unplug the power supply line.
After treatment you may clean the treatment pads with your disinfectant of choice.
Reminder: Leave the covers on the treatments pads at all times.
Place the treatment pads flat until next use.
Treatment course of 5D maxlipo laser machine
1-2 times a week, a course of treatment is 8-10 times. The treatment time can be adjusted from 5-45 minutes, which can be selected according to the treatment areas.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.