Multifunctional 3 In 1 RF Cavitation Machine For Body Lift
Price:
Negotiable
MOQ:
1
Delivery Time:
5-8 woking days
Brand:
OEM
Product Description
Body Lift Multifunctional 3-In-1 Rf Cavitation Machine
Overview of cavitation machine:
It is a NEW unoisetion ultrasonic cavitation 2.0 body slimming machine to melt fat and tighten loose skin. This fat burner ultrasonic cavitation machine is just what you need to explosive or stubborn fat that promotes your metabolism to keep your body shape. It is a machine that burns fat cells while eliminating cellulite as well as uses RF treatment to enhance collagen production and tighten skin.
Ultrasonic cavitation 2.0 machine With high-frequency vibration per second can provide a unique cell massage, enhance fatty cells melt and increase cell activity, promote blood circulation, improve skin elasticity.
The cavitation frequency has been adjusted at the factory, unless necessary, do not adjust it lightly.
When stopping, click the middle position as shown in the figure, put a drop of water in the middle, then click plus or minus to adjust the appropriate frequency, observe the energy of the water, and then click back.
The proposed method of operation of cavitation machine:
Arm
1. From the elbow to the armpit, do lymph drainage;
2. Circular motion to stimulate the lymph nodes;
3. Counter-clockwise circularmotion or by pushing back and forth,decomposition of excess fat;
4. To tighten the skin from the elbow to the armpit.
Abdomen
1. around the navel from small to large Clockwise circular motion, Helps bowel movements;
2. small circle to big circle, in reverse Clockwise, circling pushed down.
3. Massage back and forth from the outer ribs to the abdomen.
Cavitation use
There is 4 mode of M1, M2, M3 and M4 as described as follows:
"M1" is continuous working for 3 sec and discontinuous for 3 sec.
"M2" is continuous working for 2 sec and discontinuous for 2 sec.
"M3" is continuous working for 1 sec and discontinuous for I sec.
"M4” is continuous working for 0.5 sec and discontinuous for 0.5 sec.
Clicking "-" to decrease the strength or click “+" to increase it.
according to the customer's,Acceptable level, and press “START” key to begin operation
Method: After applying the gel, massage the specific part of the skin to be treated , About 15 to 20 minutes.
Matters needing attention:
1. Apply cooling gel to the part of skin to be treated before the treatment.
2. Keep close contact between the probe and the skin.
3. Adjust the intensity from low level to high level.
4. Do not keep the applicator at the same place
5. Move the applicator slowly, But constantly
6. Avoid the treatment over bone and do not aim directly to the joint
7. Pay attention to the temperature of the cavitation handle when using it, and stop using it for ten minutes after half an hour of use.
8. Cavitation is forbidden to work without gel. If it doesn't work and you need to re-adjust the frequency, please contact the supplier.
9. There will be some gueste appear tinnitus when using the burst fat head treat-ment, this phenomenon is a normal phenomenon,Because this frequency band has exceeded the range of human sound waves.
Body RF use
There is 4 mode of M1, M2, M3 and M4 as described as follows:
"M1" is always output.
"M2" is continuous working for 0.5 sec and discontinuous for 0.5 sec.
"M3" is continuous working for 1 sec and discontinuous for I sec.
"M4” is continuous working for 1.5 sec and discontinuous for 1.5 sec.
Clicking "-" to decrease the strength or click “+" to increase it. according to the customer's,Acceptable level, and press “START” key to begin operation
Method: After applying the gel, massage the specific part of the skin to be treated , About 15 to 20 minutes.
Notes:
1. Spread gel on the treated area evenly.
2. Start with low-energy. We suggest to test for the proper energy level to use on the back of clients before using on the to be treated areas.
3. Do not use essential oil as the medium.
4. Move the applicator slowly, but constantly.
5. If you need to take a break during the treatment, please press "PAUSE"
FACE RF
1. Massage the mandible center in circles to produce deep heat.
2. Massage lower jaw in lines.
3. Massage the triangle zone of both sides of the face in circles.
4. Massage from jaw to angulus oris to ear in lines.
Face RF use
There is 4 mode of M1, M2, M3 and M4 as described as follows:
"M1" is always output.
"M2" is continuous working for 0.5 sec and discontinuous for 0.5 sec.
"M3" is continuous working for 1 sec and discontinuous for I sec.
"M4” is continuous working for 1.5 sec and discontinuous for 1.5 sec.
Clicking "-" to decrease the strength or click “+" to increase it.
according to the customer's,Acceptable level, and press “START” key to begin operation
Method: After applying the gel, massage the specific part of the skin to be treated, About 15 to 20 minutes.
Notes:
1. Spread gel on the treated area evenly.
2. Start with low-energy. We suggest to test for the proper energy level to use on the back of clients before using on the to be treated areas.
3. Do not use essential oil as the medium.
4. Move the applicator slowly, but constantly.
5. If you need to take a break during the treatment, please press "PAUSE"
6. Skin around eyes and forehead is very sensitive, the RF output intensity should be kept relatively low in such areas.
Scope of application of cavitation machine:
a, arms,legs,thighs,arms,back,abdomen and other parts;
b, adipose tissue and various conditions have improved therapeutic effect;
c, Shou Shu,decompression,Shou Shu pain(such as joint pain,sciatica)
d, promote mechanical aerobic exercise of skin tissue,rapidly relieve stress, reduce fatigue effect;
e, lifting and firming the skin,restoring skin elasticity; factivation of cell cycle and promote metabolism to produce more collagen and elastic
fibers,improving the facial and boody skin tissue;
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Gorgeous Beauty Equipment Manufacture
Location
Room 1603, Dingxin Building, Zhenguan Road, Weiyang District, Xi'an City, Shaanxi Province
Contact Person
anna