Picosure Tattoo Removal Machine 1064nm 755nm 532nm

Principle of pico laser machine:

Laser smooth is convergent laser focus, focus spot diameter of 2 ~ 10 mm.When laser gathering isometric point contact with the skin convergence focal spot diameter is
1 mm, when not in contact with the patient position, adjust the laser convergence isometric point and the distance between the patients with skin is adjust convergence
focal spot diameter, adjusting the laser gathering isometric point and the distance between the patients with skin range from 0 to 3 mm, the corresponding convergence
focal spot diameter for adjustment, in 2 ~ 10 mm distance after short of effective treatment.Laser light launched into mouth will into the laser light arm inside, and then
use locking device lock base according to the operator of the handle, can adjust the center of gravity of light arms, appropriately adjust the way as the center of rotation of the adjustment block fixed nut!

Technical parameter of pico laser machine:

Constitute of pico laser machine:

Skin laser treatment instrument host, laser/laser joint arm/laser power/cooling system/display control system Several modules laser cavity when laser can generate high voltage pulse xenon lamp and YAG crystal bar. When laser xenon lamp injection of xenon lamp light after a certain amount of energy, stimulating the YAG crystal rods to launch the 755/1064/532 nm laser, polaroid is the emitted laser is unified to the same direction, making the emitted laser single better. After in the laser cavity, before the mirror, mirror of the laser resonant part, after short time trigger Q crystals, again after two 45 degree mirror reflection by emitting laser light arms. In the process of laser xenon lamps in the light of have a large amount of heat produced;after water circulating system will be hot.