High Desalination Ro Membrane For 5000 Tds 2521 Industrial Commercial Design 300 GPD
High Desalination 2521 RO Membrane for Industrial & Commercial RO Water Purifier Treatment
Reverse osmosis technology can achieve high-efficiency separation of inorganic salts and water molecules, and is widely used in seawater desalination and water quality treatment. Among them, the precipitation and growth of microorganisms at the interface of reverse osmosis membrane is the biggest cause of membrane fouling. The development of a new type of reverse osmosis membrane with anti-biological fouling is the most effective means to combat membrane fouling. Therefore, this topic is based on The aggregation and growth process of microorganisms at the interface of the reverse osmosis membrane, a bifunctional anti-biofouling reverse osmosis membrane that can resist the adsorption of pollutants in the first stage and inhibit the growth and reproduction of microorganisms in the second stage at the same time is prepared. The "passive" antifouling mechanism and the "active" antifouling mechanism were discussed. In this study, polydopamine was coated on the surface of polyamide composite membrane (TFC) by oxidative polymerization, and was synthesized in situ on it by chelation and reduction. Nano-copper particles were used to prepare a surface-modified reverse osmosis membrane.
Specification
| Model Number | Description | 2521-LP |
| Performance & Test Condition |
The Desalination Rate % | 99.5% |
| Water Rate GDP | 300 | |
| The Test pressure | `150si | |
| Test solution Temperature | 25± 1ºC | |
| Test Solution Concentration NaCl | 1500PPM | |
| Recovery Of Single-Branch Membrane Element | 8% | |
| Feed water SDI | 5 |
Operating Limit:
| Maximum Operating Temperature | 113ºF(45ºC) |
| Maximum Working Pressure | 600psi(41.0 bar) |
| The high pressure drop | 15psi (1.0bar) |
| Continuously operating PH range a | 3-10 |
| Short wash PH range (30min) b | 2-12 |
| Maximum feed water SDI | SDI 5 |
| Tolerance Of Free Chlorine | <0.1ppm |
| Maximum pressure drop for single membrane element | 15psi(0.1Mpa) |
- When PH is above 10, the Maximum Temperature of Continuous Operation is 35ºC.
- Under certain conditions, the presence of free chlorine and other oxidants in the water may cause serious membrane damage, which doesn't belong to product warranty range.
FAQ:
Q: How to buy your products?
A: we need some essential information include sewage sources, sewage quality ( COD, BOD,SS),Required Filtered water quality, designed technological process, site engineering conditions (contact us for details),then we will design the uitable solutions for you and prepare to give you best price.
Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balanced against the copy of B/L.
Q: What is the delivery time?
A: Usually within 15days. Also depends on order quantities.
Q: Can the package be customized by our own logo ?
A: Yes, the package can be customized your logo, but the MOQ will be higher for which we can discuss as per the specific orders.
Q: How to install after the products arriving destination?
A: We will provide detailed illustrations to you. And we can also provide guide to your workers how to use it and how to maintain
it.
Q:What's the certification do you have?
A: We have NSF, ISO9001, OHSAS18001, ISO14001 Certifications.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.