12v 200ah 10h Front Terminal Battery Maintenance Free
12v 200ah 10h Front Terminal Battery Maintenance Free
A 12V AGM (Absorbent Glass Mat) deep cycle battery is a type of battery commonly used in applications that require a steady and reliable power supply over an extended period. AGM batteries are constructed using a special design that incorporates a fiberglass mat between the battery plates, which absorbs and immobilizes the electrolyte. This construction makes AGM batteries spill-proof, maintenance-free, and resistant to vibration.
Deep cycle batteries are specifically designed to provide a consistent level of power over a long duration, making them suitable for applications such as recreational vehicles (RVs), boats, solar power systems, electric vehicles, and backup power systems.
The "12V" in the battery's name refers to its nominal voltage, which means the battery's average voltage output is around 12 volts. However, it's essential to note that the actual voltage can vary depending on the battery's state of charge. A fully charged 12V AGM deep cycle battery typically measures around 12.8 to 13.2 volts.
Specification
| Nominal Voltage | 12V (6 cells) | |
| Nominal Capacity | 200Ah@10 hour-rate | |
| Dimension | Length | 546±1(21.5 inches) |
| Width | 124±1(4.88 inches) | |
| Height | 325±2(12.79 inches) | |
| Total Height | 325±2(12.79 inches) | |
| Weight | Approx. 56kg (123.2lbs) | |
| Reference Capacity (25°C/77°F ) | 20 hour rate (10.4A) | 209.1Ah |
| 10 hour rate (20.0A) | 200Ah | |
| 5 hour rate (33.6A) | 173Ah | |
| 3 hour rate (52.4A) | 157.2Ah | |
| 1 hour rate (122.2A) | 122.2Ah | |
| Max. Discharge Current (25°C/77°F) | 1200A (5S) | |
| Internal Resistance | Full charged at 25℃(77°F): Approx. 2.9mΩ | |
| Charge (Constant Voltage) (25°C/77°F) | Cycle Use |
Voltage: 14.4-15.0V Initial Charging Current: Less than 50A |
| Float Use | Voltage: 13.6-13.8V | |
| Operating Temperature Range | Discharge | -20~60°C |
| Charge | 0~60°C | |
| Storage | -20~60°C | |
| Nominal Operating Temperature Range | 25°C ±3°C(77±3°F) | |
|
Capacity affected by Temperature (20 hour rate) |
40°C(104°F) | 102% |
| 25°C(77°F) | 100% | |
| 0°C(32°F) | 85% | |
| -15°C(5°F) | 65% | |
| Self-Discharge (25°C/77°F) | After 3 month | 91% |
| After 6 month | 82% | |
| After 12 month | 64% | |
| Container Material | ABS Plastic | |
Applications
1. Suitable for 19inch and 23inch power cabinet.
2. Used in telecom system including exchange board, microwave station, mobile base station, data center, radio and broadcast station.
3. Great for power supply system of private network or LAN.
4. Used as signal system battery and emergency lighting system battery.
5. Perfect for EPS and UPS system.
6. Solar and wind system
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.