Product Introduction:
5754 aluminum alloy is a typical alloy of Al-Mg elements with moderate strength, excellent processing performance, good corrosion resistance, weldability and easy forming characteristics.
Product Specification:
| Standard size of aluminum plate | 1000mm*2000mm/1250mm*2500mm/1500mm*3000mm/2000mm*6000mm |
| Thickness | 0.5-200mm |
| Hardness H0 H12 H14 H18 H22 H24 H26 H32 H111 H114 T4 T6 Other hardness can be customized | |
| It can be used for color drawing, embossing, cutting, pattern, strip and other processing | |
| The above are the standard common size, and customization is supported | |
Chemical Composition:
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | 0.2 | 0.15 | 0.15 | Remain |
Mechanical behavior:
| Material | Tensile strength (MPa) | Yield strength (MPa) | Elongation(%) | HB | |||||
| 5754 | 190-240 | 80 | 12 | 38 | |||||
Product tolerance:
| Thickness Tolerance | +/-1% | ||
| Width Tolerance | +/-1% | ||
| Length Tolerance | +/-1% |
Advantages:
· Excellent processing performance
· Good corrosion resistance
· Weldability
· Easy forming characteristics
Applications:
5754 Easy coloring in post-processing makes it often use to produce high-end doors and windows. For same area, Al-Mg alloy doors and windows are much lighter than other materials. 5754 aluminum is also suitable for the military industry of domestic, such as fuel tanks of aircraft.
