Hydraulic Concrete Cutting Machine with Circular Wire Rope Saw

Description of Hydraulic Wire Saw Cutting Stripping Machine

The hydraulic rope saw is a hydraulic motor driven by the oil pressure of the hydraulic pump station. The hydraulic motor drives the drive wheel to rotate, and the drive wheel drives the rope to rotate. At the same time, the rope rotates at a high speed in the direction of the rope guided by the driven wheel, so as to achieve the goal of cutting and removing reinforced concrete. The equipment can realize various cutting for thicker concrete. It is generally used in the static-cutting demolition of bridges, piers, dock platforms, and underwater concrete piles to ensure that the original structure is not damaged.

The hydraulic rope saw is competent for dense reinforced concrete structures, thick brick walls, and even underwater cutting operations. It can meet the cutting depth that the hydraulic wall cannot cut. The cutting depth is unrestricted, the working environment is more adaptable, and the working efficiency is higher. It is the backup equipment of the hydraulic wall saw.

Technical Parameters Related to Accessories

Advantages of Reinforced Diamond Wire Saw Machine

1. Hydraulic-driven, Diamond Wire Saw Machines can work in different situations.
2. It's made of hard materials. The wedges are running stable. Long surviving life.
3. Powerful cutting ability, it can split stone or concrete easily with no cutting depth limitation.
4. High Efficiency, and it's easy and comfortable to operate and maintain.

Method Steps of Diamond Wire Saw Cutting Machine
1. The diamond wire saw needs to be divided into cutting directions, and there are clear arrow marks on each clip of the spring diamond beaded wire saw.
2. If it is not indicated by an arrow, it can also be identified by the beads of the diamond beaded wire saw itself. The long beaded base is the tail and the short is the front, so the short front is the cutting direction of the spring diamond beaded wire saw.
3. Before use, the diamond wire saw is a closed cycle after docking, if not, it needs to be docked first.
4. When using, please make sure that the cutting direction of the diamond wire saw is forward, and cannot be cut in the opposite direction, so as to avoid the taper at the front and rear ends of the beading, and ensure the normal use of the diamond beading wire saw.
5. Install the diamond beaded wire saw on the wire saw machine, relatively tension the diamond beaded wire saw, and then start the equipment to start working.