Description of Handheld Rod Splitter
The entire working process of the splitting rod relies on the ultra-high pressure oil station. In the design process of the gas station, we independently developed an intelligent device. When the pressure reaches 100mp, the motor will stop rotating, the oil pump will stop working, and the entire gas station will be in a pressure-holding state.
 
Technical Parameter of Handheld Rod Splitter

 
Advantages of Handheld Rod Splitter
1. When the hydraulic splitting rod is working, a rock drill and a DTH drill can be used to drill a hole with a large diameter, the hole depth is at least 1-2 meters, and then the hydraulic splitting rod is placed in the drilled hole, and the hydraulic pump is started. The hydraulic splitting rod extends out of the splitting hole at the same time.
2. The splitting rod is suitable for the mining of rocks of various textures, will not produce vibration, noise, dust, etc. during the work, and can realize silent mining without affecting the surrounding. It only takes a few seconds to rupture once, and it is a fast and fast mountain-making machine, such as the mining of marble, granite, bluestone, silica, calcite, and other stones.
3. When working, no vibration, impact, noise, or dust flying chips will be generated. Fully mechanized, it is based on the excavator as a power machine for auxiliary value-added, and works in conjunction with the excavator, which can be completed, environmentally friendly, and cost-effective.

 
Application of Handheld Rod Splitter
1. Mining of metal mines, non-metal mines, and coal mines.
2. Earthwork excavation works: roads and bridges, houses, foundations, reinforced concrete demolition, and other works.
3. Tunneling projects: subways, culverts, mines, underground pipelines, river management, and other projects.
4. Smelting and dismantling work: crushing and dismantling various smelting furnaces, kilns, refractory bricks, and carbon blocks.

Working Process of Handheld Rod Splitter
The whole working process of the hydraulic splitting rod is powered by the ultra-high pressure oil station. 120Mpa belongs to the ultra-high pressure sequence, and the tightness between the various components must be of a high standard. The core components of the ultra-high-pressure gas stations we produce are imported devices. Truly zero failures. During the design of the gas station, we independently developed an intelligent device. When the pressure reaches 120Mpa, the motor will stop rotating, the oil pump will stop working, and the entire gas station will be in a pressure-maintaining state.
 
Working Notices of Handheld Rod Splitter
In operation, the hole must be straight when punching, and the rod must be placed in the hole to ensure that the rod cannot be exposed. If not, this would result in uneven force and an unachievable blasting effect. Keep the horizontal plane, be a straight line, and at the same time face the air side.