NEMA34 86mm gearbox stepper motor delivers high torque performance for robotics and monitoring equipment applications. The hybrid stepper motor series provides powerful holding torque in various sizes. When used with a microstepping driver, it reduces vibration and achieves higher step resolution.

• Bipolar or unipolar versions available
• Hybrid stepper construction
• Available in single or double shaft versions
• CE and RoHS approved
• Customizations available on request

• Step Angle: 1.8°
• Maximum Temperature: 80°C maximum
• Ambient Temperature: -20°C to 50°C
• Storage Temperature: -20°C to 100°C
• Humidity Range: 85% or less, non-condensing
• Magnet Wire Insulation: Class B 130°C
• Insulation Resistance: 100M Ohm at 500 VDC
• Dielectric Strength: 500 VDC for 1 min

• Housing Material: Metal
• Bearing at Output: Ball Bearings
• Max. Radial Load (12mm from flange): ≤80N
• Max. Shaft Axial Load: ≤30N
• Radial Play of Shaft (near to Flange): ≤0.06mm
• Axial Play of Shaft: ≤0.3mm
• Backlash at No-load: 1.5°

If our standard motor cannot meet your requirements, we can customize the motor according to your specific needs. Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, and more.

Encoder

Brake

Gearbox

Shaft