USA Allen Bradley PLC 1734-TOPS GuardLogix Safety Partner Controller

New Sealed AB 1734-TOPS POINT I/O Terminal Base Spring Clamp 8 Terminations

1734-TOPS

POINT I/O Terminal Base
The 1734-TOPS is a double slot width controller with Current draw of 5 mA @ 1.2 VDC and 800 mA @ 5.1 VDC. It has a rated power dissipation of 2.5 W and Thermal dissipation of 8.5 BTU/hr. The module has an isolation voltage rating of 30V (continuous), basic insulation, USB port-to-system, type tested at 980V AC for 60 s.
The 1734-TOPS is installed to any available slot of the 1756 chassis however, it must be installed right beside the primary controller, to form a 1oo2 architecture, applicable for systems that require up to and including Safety Integrity Level 3 (SIL 3), Performance Level e (PL e) functionality. Compatible chassis for the 1756-L7SP are 1756-A4, 1756-A4K, 1756-A7, 1756-A7K, 1756-A10, 1756-A10K, 1756-A13, 1756-A13K,1756-A17, 1756-A17K while standard power supplies are 1756-PA50, 1756-PA72, 1756-PA72K, 1756-PA75, 1756-PA75K, 1756-PB50, 1756-PB72, 1756-PB72K, 1756-PB75, 1756-PB75K.
The 1734-TOPS safety partner controller has an operating temperature requirement of 0 °C < Ta < +60 °C (+32 °F < Ta < +140 °F) and storage temperature specification of -40…+85 °C (-40…+185 °F) with 5-95% non-condensing relative humidity.
 
 

 
ABB:
1) AC800M series controller LO module
2) AC800F series controller module
3) AC31 series controller module
4) 800xA series modules
5) Bailey INFT 90 module
6) DSQC robot module spare parts
7) Advant OCS system spare parts
8) H&B Freelance
ABB Advant OCS
ABB Advant-800XA
Bailey Inft 90 and Net 90
ABB Robots
ABB Synpol D
ABB H&B Contronic
ABB H&B Freelance 2000
ABB Master
ABB Pro control P14
ABB Drives
 
Honeywell System Configuration
 
1. Control Processor
2. Fault Tolerant Ethernet Bridge ( FTEB )
3. ControlNet Interface ( CNI )
4. Redundancy Module ( RM )
5. IOLIM ( I/O Link Interface Module )
6. PM I/O Cards
7. FTA Cards
8. FSC Module
9. UCN Board
 
Application Industry
 
1. Power industry, the elevator industry, parking lot, automobile, automobile supporting.
2. Feed industry, aluminum smelting machinery, refrigeration industry.
3. Iron and steel industry, combustion control system, non-ferrous metal smelting.
4. Glass industry, engineering machinery, textile machinery, water treatment.