Interbus optical fiber / PCI, Master / Slave card from Phoenix 00-118-966 KUKA KR C2 FB,Interbus S,M/S,PCI,FO Board

Ordering Information/Limitations

Interbus Copper/PCI, Interbus Master/Slave card from Phoenix, 2 cards combined.
Copper Wiring: The standard connection can be universally used and is currently the most commonly used transmission medium. It utilizes single shield, twisted-pair cables such as Li-YCY 3x2x0.25mm. The maximum distance between two devices without additional repeater is 400m.

For the Interbus copper card, interfaces with circular connectors and multibus connectors are available.

Interbus Optical Fiber/PCI, Interbus Master/Slave card from Phoenix, 2 cards combined.
Fiber-Optic Cables: Different duplex fibers can be used, including polymer fiber (max. 50m), HCS fiber (max. 300m), and glass fiber (max. 3000m). The Interbus optical fiber card can only be used with a cable inlet.

Features of the Interbus cards:
- Range of Application: Automation
- Availability: Compatible with KUKA robot controller KR C2 edition 2005 and later versions with system software KR C V5.2 onwards.
- Scope of Delivery: Includes documentation in German and English, with detailed documentation on EN-standards (refer to Phoenix documentation for more information).

Please note:
The delivery via KUKA enables integration of the KUKA robot controller into an Interbus System. However, KUKA Roboter is not responsible for the complete system. The diagnostic cable (Interbus configuration tool) and the connector required for PC cabling (with Wieland cable inlet) are not included in the scope of delivery.