Powdery Gypsum Board Ceiling Accessories Gypsum Putty Powder For Interior Partition Walls
Plaster Putty Powder For Interior Partition Walls And Suspended Ceilings
Product Description
Plaster Putty Powder is a white powder made from solid gypsum that has been heated until it has lost all of its water, and therefore, its hydration. When you add water to the powder in a 1:2 ratio, the calcium sulfate rehydrates through a chemical reaction. As a result, it produces a paste that hardens in about an hour.
| Product Name | Plaster Putty Powder |
| Status | Powdered |
| Features | With strong bonding force, fast setting time, easy to operate, non-toxic and tasteless, easy to use, etc |
| Basic Material | Pure Natural Gypsum Powder |
| Cautions |
The amount of water added is subiect to the construction consistency. Mix well and leave it for 10-15 minutes (30 minutes in winter), then mix it again and use it. Do not add other materials other than water. |
Product Features
Plaster Putty Powder gives a smoother finish to the wall. It effectively waterproofs the wall and retains moisture. It does not flake easily to damage your wall. You can use wall putty to increase the lifespan of your expensive paint. The paint is glued perfectly to the wall with the help of a wall putty colour.
1. Exterior wall putty powder : whitening, waterproof, strong bonding force, good workability, non-toxic and harmless.
2. Improve resistance to shrinkage and crack resistance, improved surface quality.
3.Easy to mix the dry ingredients mixed, no lumps, thus saving work time due to use faster and more efficient, to improve the construction and reduce costs.
2. The mixed slurry shall be used up before the initial setting. The slurry that has initially set shall not be mixed with water again.
3. This product is a kind of pneumatic material, which is suitable for internal wall plastering, and it is not suitable for parts that are in contact with water for a long time.
4. The mortar prepared with this product shall not be mixed with other materials.
5. The shelf life is 12 months (under sealed condition).
Product Applications
Prepare the surface: Before applying plaster putty powder, it's important to ensure that the surface is clean, dry, and free of dust or debris. Use a scraper or sandpaper to remove any loose paint or flaking plaster, and wipe the surface with a damp cloth to remove any remaining dust or dirt.
Mix the plaster putty powder: Follow the instructions on the packaging to mix the plaster putty powder with water. Use a mixing paddle and a bucket to mix the powder until it reaches a smooth, even consistency.
Apply the plaster putty: Use a putty knife or a trowel to apply the plaster putty to the surface. Start by applying a thin layer and gradually build up the thickness as needed. Use the putty knife or trowel to smooth the surface and remove any excess plaster putty.
Allow the plaster putty to dry: Depending on the temperature and humidity, the plaster putty may take several hours or even overnight to dry completely. Avoid touching or disturbing the surface while the plaster putty is drying.
Sand and finish the surface: Once the plaster putty is dry, use sandpaper to smooth any rough or uneven spots. Wipe the surface with a damp cloth to remove any dust, and apply a coat of primer if you plan to paint or wallpaper the surface.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.