Inconel 625 Nickel Alloy Sheet 0.3-30mm Thickness 1000x2000mm 1219x2438mm 1500x3000mm Size
| Parameter | Details |
|---|---|
| Product Name | Nickel Alloy Plate & Sheet |
| Thickness Range | Cold Rolled: 0.3mm-3mm Hot Rolled: 3.0mm-30mm |
| Standard Sizes | Cold Rolled: 1000×2000mm, 1219×2438mm, 1500×3000mm Hot Rolled: 1500×6000mm, 1800×6000mm, 2000×6000mm |
| Processing Services | Cutting (laser, plasma, machine), Bending, Forging |
| Surface Finishes | Raw (2B, NO.1), Finished (HL, 8K, Checkered) |
| Standards | ASTM, AISI, DIN, EN, GB, JIS |
| Available Grades | Incoloy 800/800H, Incoloy 825, Inconel 600/625/690, Hastelloy B/B-2/C276/C4/C2000 |
| Manufacturers | TISCO, BAOSTEEL, ZPSS, LISCO, JISCO |
Inconel 625 is an austenitic nickel-chromium-molybdenum-niobium alloy offering exceptional corrosion resistance combined with high strength from cryogenic temperatures to 1800°F (982°C). The alloy's strength comes from solid-solution hardening by molybdenum and niobium, eliminating the need for precipitation-hardening treatments.
| Element | Content (%) |
|---|---|
| Nickel | 58.0 min. |
| Chromium | 20.0-23.0 |
| Molybdenum | 8.0-10.0 |
| Iron | 5.0 max. |
| Niobium + Tantalum | 3.15-4.15 |
| Carbon | 0.10 max. |
| Manganese | 0.50 max. |
| Property | Value |
|---|---|
| Density | 8.44 g/cm³ |
| Melting Range | 1290-1350°C |
| Modulus of Elasticity | 207.5 GPa |
| Thermal Conductivity | 10.8 W/m·K at 100°C |
| Parameter | Minimum Value |
|---|---|
| Yield Strength (0.2% Offset) | 448 MPa |
| Ultimate Tensile Strength | 862 MPa |
| Elongation in 2 inches | 50% |
- Aerospace Components: bellows, ducting systems, jet engine exhaust
- Air Pollution Control: chimney liners, FGD components
- Chemical Processing: equipment for oxidizing and reducing acids
- Marine Service: steam line bellows, ship exhaust systems
- Nuclear Industry: reactor components, waste reprocessing equipment
- Offshore Oil & Gas: flare stacks, piping systems, riser sheathing
- Petroleum Refining: waste flare gas stacks
- Waste Treatment: incineration components
Inconel 625 provides outstanding resistance to pitting, crevice corrosion, impingement corrosion, and intergranular attack. The alloy is virtually immune to chloride stress corrosion cracking and performs well in mineral acids, alkalis, and organic acids under both oxidizing and reducing conditions.
Alloy 625 can be easily welded using standard processes including GTAW, GMAW, SAW, and SMAW. No post-weld heat treatment is required. The alloy can be hot-formed at 900-1177°C and cold-formed in the annealed condition.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.