DIN 1.4541 / 321 Stainless Steel Tube Pipe Heat Resistant DN6 For Industrial Gas

DIN 1.4541 / 321 Stainless Steel Pipe Heat Resistant Stainless Tube DN6 - DN400 for Industrial Gas Pipe

About 321 Stainless Steel

Alloys 321 is austenitic stainless steel that contains stabilizing elements. It is easily welded. Annealing is often not required after welding unless stress relief is desired. It has excellent resistance to oxidation and corrosion. The addition of titanium in 321 stainless steel give some desired characteristics:

• Prevents harmful carbide precipitation in the heat affected zone (HAZ) of the weld area
• Imparts partial immunity to inter granular corrosion
• Reduced embrittlement in the HAZ of the weld area

321H stainless steel is a widely used stainless steel, where parts are heated within carbide-precipitation temperature range (800°F-1500°F) and exposed to corrosive atmosphere. 321 stainless steel is similar to 304 stainless steel, but with higher nickel content and stabilized with titanium. Titanium preferentially reacts with carbon in the steel and prevents precipitation of chromium carbides at the grain boundaries, thus preserving corrosion-resistant properties by preventing depletion of chromium near the grain boundaries during exposure within critical temperature range. This grade responds well to hardening by cold working. It has good welding characteristics; and post-weld annealing is not normally required to restore its excellent performance in a wide range of corrosive conditions.

• Responds well to hardening by cold working
• Good welding characteristics
• Excellent corrosion resistance in a wide variety of corrosive media
• High creep & stress rupture properties

Application of 321 Stainless Steel

Stainless Steel Alloys 321 and 321H pipe, flanges and fittings are common to the petroleum refining industries. Alloy 321 and 321H is often used to make radiant superheaters, boiler tubes, high pressure steam pipes, and general refinery piping. They are also used for heavy-duty exhaust systems and manifolds.

Products Type and Standard of our 321 Stainless Steel Material