316 Stainless Steel Rebar S8 - S50mm ASTM A955 For Bridge And Sea Platfrom
316 Stainless Steel Rebar S8 - S50mm ASTM A955 Rebar for Bridge and Sea Platfrom
Products Specification
| Products Name | Stainless Steel Rebar |
| Products Diameter Range | φ4mm - φ40mm |
| Length | 6.1m/pcs or cutting any length as request |
| Surface | Pickling finishing, bright finishing |
| Steel Grade | 304 / 316L / 321 / 2205.etc |
| Standard | ASTM A955 (GB DIN EN available) |
| Service | Cutting |
| Other Shape | Square , Flat, Hexagonal, Round.etc |
| Loading Port | Shanghai Port |
| MOQ | 500 kgs |
About Stainless Steel Rebar
stainless steel nonmagnetic rebar normally is used for electric power station building construction, if you want to build construction beside electric power station, use this rebar can avoid induction electric current happened in rebar, can protect the building and body.
This rebar was produced by the raw material of stainless steel round bar, hot rolled to deformed steel bar, then use acid pickling to clean the surface cementite, so as to reduce the magnet.
This is a complex process, plus the special usage, especially for the length of 12m acid pickling, it is a difficult to get this goods without experience.
Stainless Steel ReBar Weight Informations
| Item | Diameter (mm) | Area (mm2) | Weight (kg/m) |
|---|---|---|---|
| DT01 | 6 | 28.3 | 0.222 |
| DT02 | 8 | 50.3 | 0.395 |
| DT03 | 10 | 78.5 | 0.617 |
| DT04 | 12 | 113 | 0.888 |
| DT05 | 14 | 153.9 | 1.209 |
| DT06 | 16 | 201 | 1.58 |
| DT07 | 18 | 254 | 2 |
| DT08 | 20 | 314 | 2.47 |
| DT09 | 25 | 491 | 3.85 |
| DT10 | 32 | 804 | 6.31 |
| DT11 | 40 | 1257 | 9.86 |
| DT12 | 50 | 1963 | 15.41 |
The three grades of stainless steel rebar held in stock are:
- Stainless steel grade 304 (1.4301) Ribbed bar (Rebar) suitable for most atmospheric and concrete covered environments.
- Stainless steel grade 316 (1.4436) Ribbed bar (Rebar) recommended grade for marine and corrosive environments.
- Stainless steel duplex grade (1.4462) Ribbed bar (Rebar) recommended grade for marine and corrosive environments.
when Choose Stainless Steel Rebar Instead of Steel Rebar
- Appropriate choice for corrosion resistance and cost
- Over specification of corrosion resistance for the application
- May be suitable in some instances: specialist advice should be obtained
- Grades suitable for specialist applications which should only be specifiied after consultation with corrosion specialists
- Unsuitable for the application
Stainless Steel Rebar Picture
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.