CD4MCU Alloy Stainless Steel Bars Ideal for Chemical Marine
CD4MCU Alloy Stainless Steel Bars Ideal for Chemical & Marine Applications
Products Specification
| Products Name | Stainless Steel Round Bar |
| Grade | CD4MCU |
| Products Diameter Range | φ10mm - φ350mm |
| Length | 6.1m/pcs or cutting any length as request |
| Surface | Pickling finishing, bright finishing |
| Other Grade |
304,304L,309S,310S,310H,316L,316Ti,316H,317L,321,329,347,410,420, 430F,431,440A/B/C,2205,2507,904l,254SMO,253MA,CD4MCU,XM-19,17-4PH,15-5PH,17-7PH,C276,600,601,625,718,800,800H,825,926.etc |
| Standard | ASTM JIS,GB,DIN EN |
| Service | Cutting |
| Other Shape | Square , Flat, Hexagonal, Round.etc |
| Loading Port | Shanghai Port |
| MOQ | 500 kgs |
- C (％): ≤ 0.04
- Si (％): ≤ 1.00
- Mn (％): ≤ 1.00
- P (％)≤: 0.040
- S (％)≤: 0.040
- Ni (％): 4.75 ~ 6.00
- Cr (％): 24.5 ~ 26.5
- Mo (％): 1.75 ~ 2.25
- Cu (%): 2.75 ~ 3.25
- Condition: solution, annealed
- Tensile strength, σb/MPa: ≥ 689
- Yield strength, σ0.2/MPa: ≥483
- Elongation, δ (％): 16.0
- Reduction of area, ф (％): -
- Hardness | HRB: 94RB ~ 27RC
Stainless Steel Rod, Bar, Wire, Cold drawn, ground and polished
Standard length of bars: 2 - 3 meter.
Austenitic Stainless Steel for implants, with high corrosion resistance.
According to ISO 5832/1, F-138 Vacuum melt grade (VAR)
For surgical instruments, fracture fixation devices, screws for implants and many more similar applications.
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
TYPICAL APPLICATIONS
- Chemical equipment
- Mechanical parts used in the condition of corrosion resistance
- Bolt and nut
- Pressure vessel
- Round bar / Wire rod (Diameter): 5.5mm to 550mm
- Square bar / Flat bar: 3mm to 1000mm
- Plate / Sheet steel / Steel strip: 0.1mm to 1000mm
- Width: 8mm to 1000mm
- Length: random length or based on the customer's special requirement.
- Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.