310S Stainless Steel Seamless Pipe ASTM EN DN10-DN400 Custom Cut

Price Negotiable

Price: 5-8 USD/Kg

MOQ: 500 kgs

Delivery Time: 5 - 12 days based on the quantity

Brand: DELTA

Product Description

Heat Resistant 310S / 1.4845 Stainless Steel Pipe / SMLS Pipe Custom Cutting Pipes

Products Specification

Products Name	310S Stainless Steel Seamless Pipe
Grade:	304 304L 309S 310S 314 316L 316Ti 321 329 347H 410 2205 2507 S32760 904L 254SMO and equal grade in GB JIS EN DIN Standard
Standards:	ASTM A213M-94b ASTM A249M-94a ASTM A269-94a ASTM A312M-94b,ect.
	DIN 17456-85 DIN 17458-85 DIN 17459-92.ect
	JIS G3446-1994 JIS G3448-1997 JIS G3459-1997 JIS G3463-1994,ect.
	GB13296-1991 GB14975-2002 GB14976-2002,ect.
Size:	ND5 - DN400
Length:	6m length or cutting any length as request
Applications:	fluid and gas transport, structure , boiler, heat exchanger, super heater

310S stainless - steel tube is a kind of hollow long - strip circular steel made of austenitic chromium - nickel stainless steel. The following is a detailed introduction:

Parameters:
- Chemical composition (%): Ni 19.00 - 22.00, Cr 24.00 - 26.00, Si ≤ 1.50, Mn ≤ 2.00, C ≤ 0.08, S ≤ 0.030, P ≤ 0.035.
- Density: 8.0 g/cm³.
- Mechanical properties after solution treatment: Yield strength ≥ 205 MPa, Tensile strength ≥ 520 MPa, Elongation ≥ 40%, Hardness: HBS ≤ 187, HRB ≤ 90, HV ≤ 200.
- Size and allowable deviation: The allowable deviation of the standardized outer diameter is divided into four levels, D1: ±1.5%, minimum ±0.75 mm; D2: ±1.0%, minimum ±0.50 mm; D3: ±0.75%, minimum ±0.30 mm; D4: ±0.50%, minimum ±0.10 mm.
Standards: Commonly used execution standards include ASTM A312, ASTM A790, ASME SA213, ASME SA249, ASME SA789, GB/T14976.
Similar Grades: Domestic grade 0Cr25Ni20, American grade SA213/TP310S. It is also commonly known as 310S, and also called 2520.
Applications:
- Petrochemical industry: Used for steam pipelines, furnace tubes, heat exchangers, etc. under high - temperature and high - pressure conditions.
- Energy field: Such as superheater and reheater tube bundles of power plant boilers, and some key components of nuclear power plants.
- Food processing: Due to its non - toxicity and harmlessness, it can be used for the pipeline system of high - temperature sterilization equipment.
- Medical equipment: Used for medical equipment such as high - temperature steam sterilizers that need to withstand high - temperature environments.
- Automobile manufacturing: Especially the exhaust system of high - performance racing cars, which requires materials to withstand extremely high temperatures and pressures.
- Environmental protection equipment: Such as the flue pipes of incinerators and the pipes for treating high - temperature corrosive gases.
Packaging: Usually, each 310S stainless - steel tube is sleeved into a plastic bag, and then the pieces are wrapped with waterproof materials and bundled with nylon ropes. The bundles are strapped with plastic strips. The ends of the pipes are protected by plastic caps. Each bundle is covered with plastic to protect against bad weather. They are packed in hexagonal bundles, wooden boxes, steel or wooden crates, etc. Clear labels are attached to the outside of the package for easy identification of the quantity and product ID. For longer steel pipes, special packaging methods may be used, such as using brackets or protective plates for fixation to prevent deformation or damage during transportation. Packaging can also be carried out according to customer requirements.