Metallic Texture, Electroplating Treatment,Fashion Plating Tile

                                          Product Description:

Just the right amount of accents
tone of the whole space
With the heart of a craftsman, the beauty of the world

Tiling method

Tile adhesive / structural adhesive can be used
You can use cross card locator when tiling
Easier to neatly align the seams
Small tiles recommended to leave 2-3mm paving
Large tiles recommended 3-5mm

Construction steps:

1. Grouting agent mixing: medium-in-one two-in-one adhesive caulking agent to water, the ratio of water topowder is 1:4, stir until no powder, the slurry is guaranteed to be used within 2 hours (Note: Do not soak thewater before the mosaic is laid )

2. Flatten the base surface: the paving base surface should be clean and flat, then use the paving serratedknife to smooth the adhesive to the wall; the construction environment temperature is guaranteed between 5and 39 degrees Celsius.

3. Preparation for paving: use a serrated knife to scrape the wavy stripes on the patch plane.

4. Paving: When laying the mosaic, use the balanced balance ruler to put a mosaic on the reference surfaceto ensure the balance between each mosaic.

5. Plaster reinforcement: After the mosaic is laid, gently press the surface with a caulking sponge. Let thesurface level and mix evenly to ensure complete stability.

6. Preparation of caulk: stir the caulk.

7. Caulking: Fill the mosaic seam carefully with a sponge knife. The mosaic seam is not filled with dust andit is inconvenient for future cleaning. (Note: a soft tool must be used. The final coagulation strength at theseam is 28 days. During the period, try to avoid soiling).

8. Cleaning: Prepare a clean rag. After the filling is completed, the surface can be cleaned after 1 hour.Daily cleaning can be done directly with a wet towel.