GY8768 GY8785 Carbide Cutting Tool Custom Profile End Mill
Carbide profile cutting tool improves component’s surface quality, increases cutting tools life performance and productivity. Main products CTRI develops are used in manufacturing industry including turbines, generators equipment and aerospace etc. CTRI provides experienced and systematic solutions in key spare parts such as turbine processing, various root processing, turbine rotor and generator rotor etc.
Carbide Profile Mills
Application Areas: energy industry generating equipment manufacturing , aerospace stainless steel, titanium , high temperature alloy processing.
Tool Accuracy: Shank Tolerance Level H6, Tool Profile : Tolerance + -0.005mm
| Cutting data recommendations | ||||
| Cutting Materials | Stainless Steel | High-strength Steel | ||
| Processing Method | Roughing | Finishing | ||
| Cutting Speed(m/min) | 80-160 | 130-240 | 32-96 | |
| Feed(m/min) | 0.4-1.2 | 0.4-1.0 | 0.4-0.8 | |
| Cutting Depth(mm) | 0.5-2.5 | 0.5-2.5 | 0.5-1.5 | |
| Cutting Material and Coating | GY8768 | GY8785 | GY8768 | GY8785 |
| Cooling Method | Dry | Wet | Dry /Wet | Dry /Wet |
2. Carbide Die, Abrasion Wear Parts, Rough Material
Application Areas: generating equipment manufacturing in energy industry, automobile manufacturing , small margin blanks of aerospace tool , carbide die and abrasion wear parts.
3. Standard Carbide End Mills
Application Areas: generating equipment manufacturing in energy industry, aerospace stainless steel, titanium, high temperature alloys and aluminum alloy, hardened mold processing, general tool and mould manufacturing.
End Mills
Cutting data recommendations
Liner velocity:coated(80-100m/m)
uncoated (80-100m/m)
Single teeth feed:(0.1-0.2mm/m)
End Mills
| Specifications and Models | |
| Edge Diameter | d 4--32 |
| Shank Diameter | D 6,8,10,12,14,16,18,20,24,25,32 |
| Edge Length | l 10--100 |
| Total length | L 50--200 |
| Edge number | Z 2,3,4,6,8 |
| Helix Angle Size | 0°, 5°, 15°, 20°, 30°, 35°, 40°, 45° |
Unit: millimeter(mm)
Corner Radius Mills
Cutting data recommendations
Liner velocity:coated(80-100m/m)
uncoated (80-100m/m)
Single teeth feed:(0.1-0.2mm/m)
Corner Radius Mills
| Specifications and Models | |
| Edge Diameter | d 4--32 |
| Shank Diameter | D 6,8,10,12,14,16,18,20,24,25,32 |
| Edge Length | l 10--100 |
| Total length | L 50--200 |
| Edge number | Z 2,3,4 |
| Helix Angle Size | 0°, 5°, 15°, 20°, 30°, 35°, 40°, 45° |
| Corner Radius | R 0.5--10 |
Ball Nose End Mills
Cutting data recommendations
Liner velocity:coated(80-100m/m)
uncoated (80-100m/m)
Single teeth feed:(0.1-0.2mm/m)
Ball Nose End Mills Unit: millimeter(mm)
| Specifications and Models | |
| Edge Diameter | d 4--32 |
| Shank Diameter | D 6,8,10,12,14,16,18,20,24,25,32 |
| Edge Length | l 10--100 |
| Total length | L 50--200 |
| Edge number | Z 2,3,4,6,8 |
| Helix Angle Size | 0°, 5°, 15°, 20°, 30°, 35°, 40°, 45° |
| Ball Nose Diameter | R 2--16 |
Conical Ball Nose End Mill
Cutting data recommendations
Liner velocity:coated(80-100m/m)
uncoated (80-100m/m)
Single teeth feed:(0.1-0.2mm/m)
Conical Ball Nose End Mill Unit: millimeter(mm)
| Specifications and Models | |
| Conical Degree | 2°--10° |
| Shank Diameter | D 6,8,10,12,14,16,18,20,25,32 |
| Edge Length | l 10--100 |
| Total length | L 100--300 |
| Edge number | Z 2,3,4, |
| Helix Angle Size | 0°, 5°, 15°, 20°, 30°, 35°, 40°, 45° |
| Ball Nose Diameter | R 2--16 |
High-speed Mill, Large Helix Angle Mill, Unequal Tooth Mill
Cutting data recommendations
Liner velocity:coated(80-100m/m)
uncoated (80-100m/m)
Single teeth feed:(0.1-0.2mm/m)
| Specifications and Models | |
| Shank Diameter | D 6,8,10,12,14,16,18,20,25,32 |
| Edge Length | l 10--100 |
| Total length | L 80--200 |
| Edge number | Z 2,3,4, |
| Helix Angle Size | 20°, 30°, 35°, 40°, 45° |
| Ball Nose Diameter | R 2--16 |
Exchangeable Heads End Mills
Cutting data recommendations
Liner velocity:coated(80-100m/m)
Single teeth feed:(0.1-0.2mm/m)
Exchangeable Heads End Mills
| Specifications and Models | |
| Edge Diameter | d 10,12,16 |
| Shank Diameter | D 20 |
| Edge Length | l 20 |
| Total length | L 100--200 |
| Edge number | Z 3,4, |
| Helix Angle Size | 15°, 20°, 30° |
| Ball Nose Diameter | R 5,6,8 |
| Corner Radius | r 0.5--3 |
4. Machine Clip Inserts
We developed special milling base materials graded GY83 and GY87, which have remarkable toughness and excellent wear resistance especially matching with preferred PVD composite coating by using the addition of tombarthite elements and a special sintering processing. The materials are mainly used in milling of high-temperature alloys, titanium, stainless steel, turbine blades and other difficult-to-machine materials. This kind of coating with a high resistance to flank wear and crater wear when milling stainless steel.
Blades, Rotors and Special Steel Series of Carbide Mill Inserts
| Cutting Data Recommendations | |||||
| Cutting Materials | Stainless Steel | Based Alloy | Titanium | ||
| Processing Method | Roughing | Finishing | |||
| Cutting Speed(m/min) | 80-160 | 130-240 | 40-120 | 40-60 | |
| Feed(m/min) | 0.4-1.2 | 0.4-1.0 | 0.6-0.8 | 0.4-0.8 | |
| Cutting Depth(mm) | 0.5-2.5 | 0.5-2.5 | 0.5-1.5 | 0.5-1.5 | |
| Cutting Material and Coating | GY8768 | GY8785 | GY8768 | GY8785 | GY8785 |
| Cooling Method | Dry | Wet | Dry /Wet | Dry /Wet | Dry /Wet |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.