Keysight N5171B EXG X-Series RF Analog Signal Generator 9 kHz to 6 GHz Rackmount/Benchtop Cost-Effective
Price:
Negotiation
MOQ:
1 set
Delivery Time:
Negotiable
Brand:
Keysight (Agilent)
Product Description
Rackmount Durable EXG Signal Generator, Keysight Agilent N5171B X Series
Keysight Agilent N5171B EXG X-Series RF Analog Signal Generator 9 KHz To 6 GHz
Cost-effective signal generator optimized for manufacturing test applications.
Key Benefits
- Achieve faster throughput and greater uptime
- Perform basic parametric testing of components and functional verification of receivers with industry-leading output power
- Thoroughly verify receiver performance by simulating complex analog modulation scenarios with multi-function generator capability
- Minimize downtime and expenses with self-maintenance solutions and low-cost repair
Hardware Performance
- Confidently test components with an excellent level of accuracy and repeatability
- Compensate for test system losses with industry-leading output power
- Maximize throughput with fast switching speed
- Shrink your test stand with two rack-unit height
- Get the performance and capabilities you need today and easily upgrade later
Low Cost of Ownership
- Increase uptime with high mean time between failures (MTBF) based on first-generation MXG track record
- Minimize downtime and expenses with self-maintenance strategy and low-cost repairs
Technical Specifications
- 9 kHz to 1, 3 or 6 GHz frequency range
- +21 dBm specified power to 3 GHz with electronic attenuator
- < 900-µs simultaneous switching of frequency and power
- < -121 dBc/Hz (typ) phase noise at 1 GHz and 20 kHz offset
- AM, FM, ØM, and narrow pulse modulation
- Pulse train generator
- 10 MHz multifunction generator and LF out
- Digital step and list sweep modes
- 1000BaseT LAN, LXI, USB 2.0, and GPIB interfaces
- SCPI, IVI-COM, MATLAB drivers
- Backward compatible with all ESG, MXG, PSG, and 8648x signal generators
- Keysight USB power sensor compatible with embedded display and SCPI control
Available Options
| Option Code | Description |
|---|---|
| 004 | Upgraded Processor |
| 007 | Analog ramp sweep |
| 008 | Removable flash memory |
| 030 | Best Value Bundle Discount: Includes Options 1EH, 1EU, UNW |
| 0BV | Service Documentation, Component Level |
| 0BW | Printed Copy of the Assembly-Level Service Guide |
| 1A7 | PSG Series ISO 17025 compliant calibration with test data |
| 1CM | Rackmount flange kit |
| 1CN | Front handle kit |
| 1CP | Rackmount flange with front handle kit |
| 1E1 | Step attenuator |
| 1EA | High RF output power +17dbm (S/N 5110 and older) |
| 1ED | Type-N (f) RF output connector |
| 1EH | Improved harmonics below 2 GHz |
| 1EM | Moves all front panel connectors to the rear panel |
| 1EU | High output power + 30 dbm (S/N: > 5110) |
| 1EZ | Extended Support Life of 5 to 10 years after product discontinuance |
| 1SM | Scan modulation |
| 2E1 | Adds a step attenuator for SN prefix greater than or equal to 4928 |
| 2EH | Adds improved harmonics below 2 GHz for units with Option 1EU or SN prefix greater than or equal to 4928 |
| 2EU | Adds high output power (Option 1EU) for SN prefix less than 4928 without Option 1EA |
| 2NW | Adds narrow pulse modulation for units with Option 1EU or SN prefix greater than or equal to 4928 |
| 2NX | Adds ultra-low phase noise performance for SN prefix greater than or equal to 4928 |
| 3EU | Adds high output power (Option 1EU) for SN prefix less than 4928 with option 1EA |
| 520 | 250 kHz to 20 GHz |
| 521 | 10 MHz to 20 GHz, Ultrahigh output power |
| 532 | 250 kHz to 31.8 GHz |
| 540 | 250 kHz to 40 GHz |
| 550 | 250 kHz to 50 GHz |
| 567 | Frequency range from 250 kHz to 67 GHz |
| 707 | Standard adapter set, 3.5mm F to 3.5mm F |
| 708 | Standard adapter set, type-N M to 3.5mm F |
| 709 | Standard adapter set, 2.4 mm |
| 710 | Standard adapter set, 1.85mm F to 1.85mm F |
| 881 | Analog Modulation Suite - includes step attenuator, AM, FM, phase modulation, scan modulation, low frequency generator and narrow pulse modulation |
| A6J | PSG Series ANSI Z540 compliant calibration with test data |
| AB1 | Korea Quick Users Guide (Korean localization) |
| AB2 | China Quick Users Guide (Chinese localization) |
| ABA | Printed Copy of the English Documentation Set |
| ABD | Germany Quick Users Guide (German localization) |
| ABE | Spain Quick Users Guide (Spanish localization) |
| ABF | France Quick Users Guide (French localization) |
| ABJ | Japan Quick Users Guide (Japanese localization) |
| ABZ | Italy Quick Users Guide (Italian localization) |
| C09 | Moves all connectors to rear panel except RF OUTPUT Connector |
| CD1 | CD-ROM Containing the English Documentation Set |
| H1G | Add 1GHz external phase reference |
| H1K | 100 kHz frequency extension |
| H1S | Add 1 GHz external frequency reference to improve spectral purity |
| H20 | 20 dBm maximum RF output power for CW frequencies 3.2 GHz to 20 GHz, at temperature of 25degC, for instruments with opts 520,1EA,1E1 |
| H23 | +23 dbm power output for frequencies 9GHz, 25degC, option 520,1EA,1E1 |
| H30 | Add internal mixer for up conversion in the 20 to 40 GHz Models |
| H42 | Provides a unique firmware revision and Preset condition |
| H43 | US Air Force TISS program |
| H44 | Frequency range from 250 kHz to 43.5 GHz |
| H5K | Provides inverted EXT1 input with 5000-ohm input impedance instead of 600 ohms |
| H60 | Add internal mixer for up conversion in the 40 to 67 GHz Models |
| H65 | Provides M9D-2065LNV mixer with two 2.4mm F connections on rear panel. RF 65GHz, LO 30GHz with doubler, 22GHz IF |
| HA1 | Improved Phase Noise performance for AFMETCAL |
| HA2 | Specified integrate phase noise for CW at 8.5GHz with offset from 10Hz to 1MHz |
| HA7 | Provides plots of phase noise at 16GHz and 18GHz, and a plot of 2nd harmonics |
| HAR | Improved Phase Noise Below 500 MHz |
| HCC | Provides 250MHz - 10GHz In and Out on the rear panel |
| HE1 | AFMETCAL SSG special |
| HEU | High output power for frequency below 3.2 GHz |
| HNS | Narrow pulse modulation to 31.8 GHz |
| HSM | Add Scan Modulation |
| HY2 | Enhanced Ultra Low Phase Noise Level 2 |
| K45 | 24 inch rack mount slide kit with flange and brackets |
| R-50C-011-3 | Agilent Calibration - 3 years |
| R-50C-011-5 | Agilent Calibration - 5 years |
| R-50C-016-3 | ISO 17025 Compliant Calibration - 3 years |
| R-50C-016-5 | ISO 17025 Compliant Calibration - 5 years |
| R-50C-021-3 | ANSI Z540-1-1994 Calibration - 3 years |
| R-50C-021-5 | ANSI Z540-1-1994 Calibration - 5 years |
| R-51B-001-3C | Return to Agilent Warranty - 3 years |
| R-51B-001-5C | Return to Agilent Warranty - 5 years |
| R-51B-001-C | Return to Agilent Warranty - 1 year |
| R-52A-001-3 | 3 Year Calibration License (Commercial) |
| R-52A-001-L | Lifetime Calibration License (Commercial) |
| R-52A-002-3 | 3 Year Calibration License (Z540/17025) |
| R-52A-002-L | Lifetime Calibration License (Z540/17025) |
| R2C | Core Instrument Firmware Enhancements |
| RMKT | Agilent Refurbished Product (Do Not Use - Certiprime Option) |
| S03 | Oleson Microwave Labs model S03MS-AG 220 - 325 GHz mm source module @ -25 dBm |
| S05 | Oleson Microwave Labs model S05MS-AG 140 - 220 GHz mm source module @ -12dBm |
| S06 | Oleson Microwave Labs model S06MS-AG 110 - 170 GHz mm source module @ -6dBm |
| S08 | Oleson Microwave Labs model S08MS-AG 90 - 140 GHz mm source module @ -2 dBm |
| S10 | Oleson Microwave Labs model S10MS-AG 75 - 110 GHz mm source module @ +5dBm |
| S12 | Oleson Microwave Labs model S12MS-AG 60 - 90 GHz mm source module @ +6dBm |
| S15 | Oleson Microwave Labs model S15MS-AG 50 - 75 GHz mm source module @ +8dBm |
| U01 | 8643A/8644B Programming language capability and bi-directional sweep.F/W C.06.10 or higher |
| U02 | Aeroflex 2040 progamming capability F/W C.06.15 or higher |
| U04 | 8664A/8665A/8665B programming capability F/W C.60.20 or higher |
| UK6 | Commercial calibration certificate and test data |
| UN5 | Standard output power |
| UNC | Standard connector (3.5 mm) |
| UND | Internal dual arbitrary waveform generator |
| UNE | Standard connector, 1.85 mm |
| UNF | No pulse modulation |
| UNG | No AM, FM, and phase modulation |
| UNM | Standard Front and Rear Panel Connector Configuration |
| UNN | No step attenuator |
| UNP | Standard spectral purity |
| UNR | Enhanced phase noise |
| UNT | AM, FM, phase modulation, and LF output |
| UNU | Pulse modulation |
| UNW | Narrow pulse modulation |
| UNX | Ultra-low phase noise performance |
| UNY | Enhanced ultra low phase noise |
Frequently Asked Questions
Can you ship orders to Canada or Australia?
Yes, we can. We send orders worldwide.
What delivery method do you use and what is the delivery time?
We can ship by EMS, DHL, FedEx, UPS, TNT with tracking number. Usual delivery time is 4-7 workdays.
What is your payment term?
100% T/T payment before shipment.
How can I ask any other question?
You can contact us online or leave us messages below.
Product Images
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Meigaolan Electronic Instrument Co. Ltd
Location
RA1-B2,F32 of Dongjianghaoyuan, Baomin Rd, Bao'an District, Shenzhen,China
Contact Person
Dannie