Used Portable U2021XA 50 MHz to 18 GHz X-Series USB Peak Average Power Sensor with USB Connectivity
Used Portable U2021XA 50 MHz to 18 GHz X-Series USB Peak Average Power Sensor
The Agilent U2020 X-series USB peak and average power sensors come bundled with the N1918A Power Analysis Manager software at no additional cost. Simply connect the sensor to your PC to perform complex pulse analysis and standard average power measurement.
Each U2020 X-series USB power sensor comes with a standard installation CD for the N1918A.
Built-in external trigger in and out: External trigger enables accurate triggering of small signals close to the signal noise floor. With the built-in trigger in/out connection on the Agilent U2020 X-series USB power sensors, you can connect an external trigger signal from a signal source or the device under test directly to the USB sensor through a standard BNC to SMB cable.
- Frequency range of 50 MHz to 18 GHz
- Wide dynamic range of -30 to +20 dBm (peak/gated), -45 dBm to 20 dBm (average only mode)
- 30 MHz video bandwidth
- Single shot real time capture at 80 Msample/sec per second
- Internal zeroing & calibration
- High measurement speed of up to 25,000 readings/second (free run/fast buffer mode)
| Option Code | Description |
|---|---|
| 100 | Type N (male) connector |
| 1A7 | Agilent Calibration + Uncertainties + Guardbanding |
| A6J | ANSI Z540-1-1994 Calibration |
| UK6 | Commercial calibration certificate with test data |
One-stop service from manufacture to shipping.
- Your inquiry related to our products or prices will be replied within 24 hours
- Well-trained and experienced staff to answer all your inquiries in fluent English
- Distributor support is offered for your unique design and some of our current models
- Protection of your sales area, design ideas, and all your private information
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.