Used Anritsu MS2724C Handheld Spectrum Analyzer 9 kHz to 20 GHz Calibrated for High Performance RF Measurements
The Anritsu MS2724C Spectrum Master Handheld Spectrum Analyzer provides wireless professionals with the performance needed for demanding measurements in harsh RF and physical environments. Whether utilized for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, regulatory compliance, or Wi-Fi and wireless network measurements, this instrument delivers fast and reliable results.
The MS2724C is a synthesizer-based handheld spectrum analyzer that provides quick and accurate measurement results. Measurements can be easily made using main instrument functions: frequency, span, amplitude, and bandwidth. Dedicated keys for common functions and a familiar calculator-type keypad enable fast data entry.
- Frequency Coverage: 9 kHz to 20 GHz
- Broadband preamplifiers over the whole frequency range for increased sensitivity around 20 dB
- Three Sweep Modes with improved Sweep Speed - up to 100 times faster
- Resolution Bandwidths from 1 Hz to 10 MHz
- New triggering choices including hysteresis, hold-off, and delay
- Enhanced Spectrum Analyzer GUI including large marker display choice
- Choice of display options for readability: normal, black and white, night vision, high contrast
- On-screen Interference Mapping as part of the Interference Analysis option
- LTE Measurements up to 20 MHz
- 30 MHz Wide Zero-Span IF Output at 140 MHz center frequency for external demodulation
- Dynamic Range: > 104 dB in 1 Hz RBW
- DANL: -160 dBm in 1 Hz RBW
- Phase Noise: -100 dBc/Hz @ 10 kHz offset at 1 GHz
- Frequency Accuracy: ±25 ppb with GPS On
- 1 Hz to 10 MHz Resolution Bandwidth (RBW)
- Traces: Normal, Max Hold, Min Hold, Average, # of Averages
- Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
- Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas
- Limit Lines: up to 40 segments with one-button envelope creation
- Trace Save-on-Event: crossing limit line or sweep complete
| Option Code | Description |
|---|---|
| 007 | Secure Data Option |
| 009 | I/Q Demodulation Hardware |
| 019 | High Accuracy Power Meter (Requires external USB Power Sensor) |
| 024 | I/Q Waveform Capture (Requires option 9) |
| 025 | Interference Analyzer |
| 027 | Channel Scanner |
| 031 | GPS Receiver Option |
| 033 | CDMA Signal Analyzers (OTA) |
| 034 | EV-DO Signal Analyzers (OTA) |
| 035 | W-CDMA/HSPA+ Signal Analyzers (OTA) |
| 037 | Fixed and Mobile WiMAX Signal Analyzers (OTA) |
| 038 | TD-SCDMA/HSPA+ Signal Analyzers (OTA) |
| 040 | GSM/EDGE Signal Analyzers (RF) |
| 041 | GSM/EDGE Signal Analyzers (Demodulation) |
| 042 | CDMA Signal Analyzers (RF) |
| 043 | CDMA Signal Analyzers (Demodulation) |
| 044 | W-CDMA/HSPA+ Signal Analyzers (RF) |
| 046 | Fixed and Mobile WiMAX Signal Analyzers (RF / Fixed) |
| 047 | Fixed and Mobile WiMAX Signal Analyzers (Demodulation / Fixed) |
| 060 | TD-SCDMA/HSPA+ Signal Analyzers (RF) |
| 061 | TD-SCDMA/HSPA+ Signal Analyzers (Demodulation) |
| 062 | EV-DO Signal Analyzers (RF) |
| 063 | EV-DO Signal Analyzers (Demodulation) |
| 065 | W-CDMA/HSPA+ Signal Analyzers (Demodulation) |
| 066 | Fixed and Mobile WiMAX Signal Analyzers (RF / Mobile) |
| 067 | Fixed and Mobile WiMAX Signal Analyzers (Demodulation / Mobile) |
| 089 | Zero Span IF Output |
| 090 | Gated Sweep |
| 431 | Coverage Mapping |
| 509 | AM/FM/PM Demodulation Analyzer |
| 541 | LTE Signal Analyzers (RF) |
| 542 | LTE Signal Analyzers (Modulation) |
| 543 | LTE Signal Analyzers (BW = 15 MHz, 20 MHz) |
| 546 | LTE Signal Analyzers (OTA) |
| 551 | TD-LTE Signal Analyzers (RF) |
| 552 | TD-LTE Signal Analyzers (Modulation) |
| 553 | TD-LTE Signal Analyzers (BW = 15, 20 MHz) |
| 556 | TD-LTE Signal Analyzers (OTA) |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.