Portable Keysight Agilent N9962A FieldFox Handheld Microwave Analyzer with 50 GHz and GPS Receiver

Price Negotiable

Price: Negotiation

MOQ: 1 set

Delivery Time: Negotiable

Brand: Keysight

Product Description

Portable Keysight Agilent N9962A FieldFox Handheld Microwave Analyzer 50 GHz

Product Overview

Portable Keysight (Agilent) N9962A FieldFox Handheld Microwave Analyzer, 50 GHz

The N9962A is a portable microwave spectrum analyzer that uses battery power. Optional features include a full-band tracking generator and preamplifier, interference analyzer, time gating, VSWR, reflection, built-in power meter and GPS receiver.

Key Features

50 GHz max frequency
Accurate spectrum analyzer measurements (± 0.5 dB) without preheating
Intuitive spectrogram display and recording make it easy to locate interference signals
Lightest all-in-one analyzer at only 7.1 lb. (3.2 kg)
The 10MHz gap-free real-time bandwidth captures intermittent signals
Combined with the USB power sensor, average power and pulse power can be easily measured, and combined with the time gating function, pulse parameters can be measured
A portable solution enables characterization of radar pulses
Perform air interface measurements for 5G TF and LTE
Capture I/Q data for RF signal monitoring and analysis
Provides geolocation and time stamp using GPS/GNSS

Technical Specifications

Maximum Frequency	50 GHz
Minimum Frequency	9 kHz
SA Start Frequency	5 kHz
System Dynamic Range	110 dB
Cable and antenna analyzer	No
Output Power	up to 4 dBm
Number of Built-In Ports	2 ports
Instrument Type	Spectrum Analyzer
Measuring function	Signal analysis Real-time spectrum analysis
Overall amplitude accuracy	±3dB
Types	Handheld
Standard Attenuator Range	30 dB
Standard Attenuator Step	5 dB
DANL @1 GHz	-159 dBm
Maximum Analysis Bandwidth	10 MHz
Phase Noise @1 GHz (1 MHz offset)	-113 dBc/Hz
Phase Noise @1 GHz (10 kHz offset)	-111 dBc/Hz
Phase Noise @1 GHz (30 kHz offset)	-108 dBc/Hz
TOI @1 GHz (3rd Order Intercept)	+13 dBM
Maximum Real-Time Bandwidth	10 MHz
Bandwidth Options	10 MHz (standard)

System Features

Built-In DC Source
GPS Receiver - Internal Only
Remote Control Capability

Power Measurement Using USB Sensor

Frequency-Offset
RF Pulse Test with Peak Sensor

Available Options

Option Code	Description
030	Remote Control Capability
208	USB Power Sensor Measurements Versus Frequency
209	Extended Range Transmission Analysis (ERTA)
210	Vector Network Analyzer Transmission/Reflection
235	Pre-amplifier
236	Interference Analyzer and Spectrogram
238	Spectrum Analyzer Time Gating
302	USB power sensor support
307	GPS Receiver
309	DC Bias Variable Voltage Source
310	Built-in Power Meter
312	Channel Scanner
320	Reflection measurements (return loss, VSWR and scalar measurements)
330	Pulse Measurements
350	Real-time Spectrum Analyzer (RTSA)
351	I/Q Analyzer (IQA)
355	Analog Demodulation
356	Noise Figure measurements
370	Over the air LTE FDD measurements
377	Over the air 5G TF measurements
358	EMF measurements
352	Indoor and outdoor mapping
371	Over the air LTE TDD measurements
361	EMI measurements
353	IQ streaming
1A7	Calibration + Uncertainties + Guardbanding (Not Accredited)
A6J	ANSI Z540-1-1994 Calibration