Fluke 1555 FC 10kV Insulation Tester with Wireless Data Collection and CAT IV 600V Safety Rating
The Fluke 1555 insulation resistance tester offers digital insulation testing up to 10 kV, making it ideal for testing high voltage equipment including switchgear, motors, generators and cables.
Data collection is easy using the Fluke Connect® wireless app. Remote operation lets you spend as little time as possible in potentially hazardous zones. Real-time trending shows a live graph on your phone, rather than a hard-to-read set of changing values. And you can create reports quickly, using pre-designed templates that you can customize with company logos. The 1555 insulation tester can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating.
- Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
- Guard system eliminates the effect of surface leakage current on high-resistance measurements
- Selectable test voltages in 50 V steps from 250 V to 1000 V, and 100 V steps above 1000 V
- CAT III 1000 V, CAT IV 600 V safety rating
- Warning function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC for increased user safety
- Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
- Long battery life gives the user over 750 tests between charges
- Large digital/analog LCD for easy viewing
- Capacitance and leakage current measurement
- Ramp function for breakdown testing
- Resistance measurements up to 2 TΩ
- Timer settings up to 99 minutes for timed tests
The tester's accuracy is specified for one year after calibration at operating temperatures of 0°C to 35°C. For operating temperatures outside the range (-20°C to 0°C and 35°C to 50°C), add ±.25% per °C, except on the 20% bands add ±1% per °C.
| Test Voltage (DC) | Range | Accuracy (± reading) |
|---|---|---|
| 250 V | < 250 kΩ | Unspecified |
| 250 kΩ to 5 GΩ | 5% | |
| 5 GΩ to 50 GΩ | 20% | |
| > 50 GΩ | Unspecified | |
| 500 V | < 500 kΩ | Unspecified |
| 500 kΩ to 10 GΩ | 5% | |
| 10 GΩ to 100 GΩ | 20% | |
| > 100 GΩ | Unspecified | |
| 1000 V | < 1 MΩ | Unspecified |
| 1 MΩ to 20 GΩ | 5% | |
| 20 GΩ to 200 GΩ | 20% | |
| > 200 GΩ | Unspecified | |
| 2500 V | < 2.5 MΩ | Unspecified |
| 2.5 MΩ to 50 GΩ | 5% | |
| 50 GΩ to 500 GΩ | 20% | |
| > 500 GΩ | Unspecified | |
| 5000 V | < 5 MΩ | Unspecified |
| 5 MΩ to 100 GΩ | 5% | |
| 100 GΩ to 1 TΩ | 20% | |
| > 1 TΩ | Unspecified | |
| 10000 V | < 10 MΩ | Unspecified |
| 10 MΩ to 200 GΩ | 5% | |
| 200 GΩ to 2 TΩ | 20% | |
| > 2 TΩ | Unspecified |
| Bar graph range | 0 to 1 TΩ (1550C) - 0 to 2 TΩ (1555) |
| Insulation test voltage accuracy | -0%, +10% at 1 mA load current |
| Induced AC mains current rejection | 2 mA maximum |
| Charging rate for capacitive load | 5 seconds per μF |
| Discharge rate for capacitive load | 1.5 s/μF |
| Leakage current measurement | Range: 1 nA to 2 mA, Accuracy: ±(5% + 2 nA) |
| Capacitance measurement | Range: 0.01 μF to 15.00 μF, Accuracy: ±(15% rdg + 0.03 μF) |
| Timer | Range: 0 to 99 minutes, Resolution setting: 1 minute, Resolution indication: 1 second |
| Live circuit warning | Warning range: 30 V to 660 V AC/DC, 50/60 Hz, Voltage accuracy: ±(15% + 2 V) |
| Software specifications | FlukeView Forms™ basic software requires a PC running XP, Vista, Win 7 or Win 8. |
| Display | 75 x 105 mm |
| Power | 12 V lead-acid rechargeable battery, Yuasa NP2.8-12 |
| Charger Input (AC) | 85 V to 250 V AC 50/60 Hz 20 VA |
| Dimensions | 269 x 277 x 160 mm (10.6 x 10.9 x 6.3 in) |
| Weight | 3.7 kg (8.2 lb) |
| Temperature (operating) | -20°C to 50°C (-4°F to 122°F) |
| Temperature (storage) | -20°C to 65°C (-4°F to 149°F) |
| Humidity | 80% to 31°C decreasing linearly to 50% at 50°C |
| Altitude | 2000 m |
| Enclosure sealing | IP40 |
| Input overload protection | 1000 V AC |
| Electromagnetic compatibility | EN 61326 |
| Safety compliance | IEC 61010-1: Overvoltage category II, Pollution Degree 2. IEC 61010-2-030: Measurement 600V CAT IV / 1000V CAT III IEC 61557-1, IEC 61557-2 |
Fluke 1555 10 kV Insulation Tester Kit includes:
- Test Cables with Alligator Clips (red, black, green)
- Infrared adapter with interface cable
- AC Power Cord
- Quick Reference Card
- USB-IR Cable Installation Guide
- IP67 Hard Case
- Certificate of Calibration
- Heavy Duty Alligator Clip Leads
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.