Anritsu 68369B Microwave Signal Generator 10 MHz to 40 GHz with Ultra-low SSB Phase Noise and Internal Modulation
Price:
Negotiation
MOQ:
1 set
Delivery Time:
1~3 Working Days
Brand:
Anritsu
Product Description
Anritsu 68369B 10 MHz to 40 GHz Signal Generator Multipurpose Used Test Equipment
The Anritsu 68369B Signal Generator is a multipurpose used test equipment offering exceptional performance from 10 MHz to 40 GHz, designed to meet diverse testing applications with precision and reliability.
Key Features
- 120 models available for perfect fit to any application
- Ultra-low SSB phase noise: -100 dBc at 10 kHz offset from 10 GHz
- Waveguide extensions to 110 GHz
- Economical upgrade options
- +17 dBm maximum power, -125 dBm minimum power
- Internal AM, FM, øM, pulse modulation
- User downloaded complex modulation capability
Technical Specifications
| Frequency Output | Twenty independent, presettable CW frequencies (F0 to F9 and M0 to M9) |
| Accuracy | Same as internal or external 10 MHz time base |
| CW Mode Stability | With aging: <2 × 10⁻⁸/day (<5 × 10⁻¹⁰/day with Option 16) With temperature: <2 × 10⁻⁸/°C over 0°C (<2 × 10⁻¹⁰/°C with Option 16) |
| Resolution | 1 kHz (0.1 Hz with Option 11) |
| Switching Time | <40 ms to be within 1 kHz of final frequency (typical maximum) |
| Sweep Width | Independently selected, 1 kHz (0.1 Hz with Option 11) to full range. Every frequency step in sweep range is phase-locked. |
| Phase-Locked Step Sweep Mode | Number of steps: Variable from 1 to 10000 Step size: 1 kHz (0.1 Hz with Option 11) to full frequency range Dwell time per step: Variable from 1 ms to 99 seconds Switching time: <15 ms +1 ms/GHz step size or <40 ms, whichever is less (typical max.) |
| Alternate Sweep Mode | Sweeps alternately between any two sweep ranges. Each sweep range may be associated with a different power level. |
| Manual Sweep Mode | Provides stepped, phase-locked adjustment of frequency between sweep limits. User-selectable number of steps or step size. |
| Programmable Frequency Agility | Under GPIB control, up to 1000 non-sequential frequencies can be stored and then addressed as a phase-locked step sweep. Data is stored in volatile memory. |
| Markers | Up to 20 independent, settable markers (F0 to F9 and M0 to M9) Video markers: +5 V or -5 V marker output, selectable. AUX I/O connector, rear panel Intensity markers: Produces an intensified dot on trace, obtained by momentary dwell in RF sweep |
Output Power Specifications
| Frequency Range | Output Power | Output Power with Step Attenuator |
| ≥0.01 to <2 GHz | +13 dBm | +11 dBm |
| ≥2 to ≤20 GHz | +9 dBm | +7 dBm |
| >20 to ≤40 GHz | +6 dBm | +3 dBm |
General Data
| Stored Setups | Stores front panel settings and nine additional front-panel setups in non-volatile RAM. System menu allows saving and recalling of instrument setups. |
| Memory Sequencing Input | Accepts TTL low-level signal to sequence through nine stored setups. AUX I/O connector, rear panel. |
| Self-Test | Instrument self-test performed when SELF TEST soft-key is selected. Error messages identify probable causes. |
| Secure Mode | Disables all frequency, power level, and modulation state displays. Stored setups remain secured when recalled. |
| Reset | Returns instrument parameters to predefined default states or values. Any pending GPIB I/O is aborted. |
| Master/Slave Operation | Allows two 68X00B output signals to be swept with user-selected frequency offset. Requires MASTER/SAVE interface cable set (part no. ND36329). |
| User Level Flatness Correction | Allows user to calibrate out path loss due to external switching and cables via entered power table. Five user tables available at up to 801 points/table. |
| Warm Up Time (Standard Time Base) | From standby: 30 minutes From cold start (0°C): 120 hours to achieve <2 × 10⁻⁸/day frequency stability |
| Warm Up Time (Option 16 Time Base) | From standby: 30 minutes From cold start (0°C): 72 hours to achieve <5 × 10⁻¹⁰/day frequency stability |
| Power | 90 to 132 Vac or 180 to 264 Vac, 49 to 440 Hz, ≤400 VA |
| Dimensions and Mass | 429 (W) × 133 (H) × 597 (D) mm [5.25 (H) × 16.875 (W) × 23.5 (D) in.], ≤23 kg (50 lb) |
| RF Output Connector | Type K female (≤40 GHz models), Type V female (>40 GHz models) |
Our Service
- One-stop service from manufacture to shipping
- Your inquiry related to our products or prices will be replied within 24 hours
- Well-trained and experienced staff to answer all your inquiries in fluent English
- Distributor ship offered for your unique design and some current models
- Protection of your sales area, design ideas, and all private information
Frequently Asked Questions
Can you ship orders to Canada or Australia?
Yes, we can. We send orders worldwide.
What delivery method do you use and what is the delivery time?
We can ship by EMS, DHL, FedEx, UPS, TNT with tracking number. Usual delivery time is 4-7 workdays.
What is your payment term?
100% T/T payment before shipment.
How can I ask any other questions?
You can contact us online or leave us messages below.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Meigaolan Electronic Instrument Co. Ltd
Location
RA1-B2,F32 of Dongjianghaoyuan, Baomin Rd, Bao'an District, Shenzhen,China
Contact Person
Dannie