Tektronix RSA600 Series Real Time Spectrum Analyzer with 40 MHz Bandwidth and 9 kHz to 7.5 GHz Frequency Range
The RSA600A Series USB spectrum analyzers offer high bandwidth laboratory spectrum analysis in a small, very transportable package.
- 9 kHz to 3.0/7.5 GHz frequency range covers a broad range of analysis needs
- 40 MHz acquisition bandwidth enables real time analysis for transient capture and vector analysis
- Amplitude accuracy of 0.2 dB to 3 GHz (95% confidence)
- High speed full-span sweeps (25.0 GHz/s) for fast setup and discovery
- Standard GPS/GLONASS/Beidou receiver
- Optional tracking generator for gain/loss, antenna and cable measurements
- DataVu-PC software enables multi-unit recording in variable bandwidths
- SignalVu-PC software offers real time signal processing with DPX® Spectrum/Spectrogram to minimize time spent finding transient problems
- Time qualified triggers enable capture of events at desired pulse widths, ideal for capturing dynamic test environments
- Frequency mask triggers facilitate the definition of a spectrum mask to capture events or signal anomalies based on their frequency and amplitude
- DPX density trigger allows you to analyze and measure infrequent or elusive RF events by defining a spectrum measurement box
- EMC/EMI pre-compliance and troubleshooting - CISPR detectors, predefined standards, limit lines, easy accessory setup, ambient capture, failure analysis, and report generation
- 15 μs minimum signal duration with 100% probability of intercept ensure you see problems first time, every time
- Signal analysis performance improves by pairing the USB RSA600A with more powerful host computers
- Application programming interface included for development of custom programs
- Characterization of RF devices, subsystems, and systems
- Manufacturing test
- Mobile field operations
- EMI/EMC compliance testing and troubleshooting
The RSA600 Series brings real-time spectrum analysis and wide analysis bandwidth to solving the problems of engineers who need to characterize, validate and manufacture their designs. The heart of the system is the USB-based RF spectrum analyzer that captures 40 MHz bandwidths with great fidelity. With 70 dB dynamic range and frequency coverage to 7.5 GHz, you can fully characterize wideband signals up to 40 MHz bandwidths.
The optional tracking generator enables gain/loss measurements for quick tests of filters, amplifiers, duplexers and other components, and you can add cable and antenna measurements of VSWR, return loss, distance to fault, and cable loss as needed.
The RSA600 Series operates with SignalVu-PC, a powerful program used as the basis of Tek's traditional spectrum analyzers. SignalVu-PC offers a deep analysis capability previously unavailable in low-cost laboratory solutions. Real-time processing of the DPX spectrum/spectrogram is enabled in your PC, further reducing the cost of hardware.
With 40 MHz of real-time bandwidth, the unique DPX® spectrum/spectrogram shows you every instance of an interfering or unknown signal, even down to 15 μs in duration.
SignalVu's advanced triggers simplify the task of acquiring pulsed, transient, or unexpected RF signals, and elusive over-the-air RF signals in the field.
- Use the time qualified trigger to specify the duration of a pulse or signal event to trigger an acquisition
- Enable the DPX density trigger to activate a capture only when a signal appears in a certain spectrum area with a specific amount of power and duration
- Define a frequency mask trigger to capture when signals appear inside or outside a predefined area
| Frequency Range |
RSA603A: 9 kHz to 3 GHz RSA607A: 9 kHz to 7.5 GHz |
|---|---|
| Frequency Marker Readout Accuracy | ±(RE × MF + 0.001 × Span) Hz RE: Reference Frequency Error, MF: Marker Frequency [Hz] |
| Reference Frequency Accuracy |
Initial accuracy at Cal (30 min warm-up): ±1 × 10⁻⁶ First year aging, typical: ±1 × 10⁻⁶ Cumulative error (typical): 3 × 10⁻⁶ Temperature drift: ±0.9 × 10⁻⁶ (-10 to 60 °C) |
| GNSS Accuracy |
When locked to GNSS: ±0.025 ppm GNSS Trained Accuracy: ±0.025 ppm to ±0.08 ppm |
| RF Input |
Impedance: 50 Ω Maximum DC voltage: ±40 V Maximum safe input power: +33 dBm (10 MHz to 7.5 GHz) Input RF attenuator: 0 dB to 51 dB (1 dB step) |
| Sweep Speed |
Full span sweep speed, typical: 25.0 GHz/sec (RBW = 1 MHz) 24.7 GHz/sec (RBW = 100 kHz) 15.7 GHz/sec (RBW = 10 kHz) 2.0 GHz/sec (RBW = 1 kHz) |
- Opt. A0: North America power plug (115 V, 60 Hz)
- Opt. A1: Universal Euro power plug (220 V, 50 Hz)
- Opt. A2: United Kingdom power plug (240 V, 50 Hz)
- Opt. A3: Australia power plug (240 V, 50 Hz)
- Opt. A4: North America power plug (240 V, 50 Hz)
- Opt. A5: Switzerland power plug (220 V, 50 Hz)
- Opt. A6: Japan power plug (100 V, 50/60 Hz)
- Opt. A10: China power plug (50 Hz)
- Opt. A11: India power plug (50 Hz)
- Opt. A12: Brazil power plug (60 Hz)
- Opt. A99: No power cord
- Opt. L0: English manual
- Opt. L1: French manual
- Opt. L2: Spanish manual
- Opt. L3: Japanese manual
- Opt. L4: Portuguese manual
- Opt. L5: Simplified Chinese manual
- Opt. L6: Korean manual
- Opt. L7: Russian manual
- Opt. L99: No manual
- Opt. C3: Calibration Service 3 Years
- Opt. C5: Calibration Service 5 Years
- Opt. D1: Calibration Data Report
- Opt. D3: Calibration Data Report 3 Years (with Opt. C3)
- Opt. D5: Calibration Data Report 5 Years (with Opt. C5)
- Opt. R5: Repair Service 5 Years (including warranty)
Yes, we can. We send orders worldwide.
We can ship by EMS, DHL, FedEx, UPS, TNT with tracking number. Usual delivery time is 4-7 workdays.
100% T/T payment before shipment.
You can contact us online or leave us messages below.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.