On / Off Grid Solar System Monocrystalline 525W Solar Panel Roof Installation
On/Off-Grid Solar System 525W Mono Crystalline Solar Panel For Roof Installation
With high-quality materials and double-glass structure, YLM-GG modules are perfectly applied Tested in harsh environments, to provide you with high reliable quality.
1.Double-sided power generation
The YLM GG modules has double-sided power generation characteristics, and the back side can effectively use the reflected light and scattered light in the environment Photoelectric power generation.
2.Excellent power generation
The YLM GG modules have low initial light decay and excellent temperature coefficient, superimposed double-sided power generation characteristics, once the modules are used, they can continue to generate more power.
3.Excellent bifacial coefficient
The YLM GG modules have an industry-leading bifacial coefficient of P-type double-sided double-glass modules.
4.Excellent weather resistance
The YLM GG modules meet the test requirements of IEC standards, with tenacious resistance to salt spray, ammonia, sand, dust,Capable of snailing and PID (potential induced decay) risks, with excellent weather resistance.
5.Self-cleaning performance
The frameless design ensures the excellent self-cleaning performance of the "DL" module.
6.Mechanical behavior
The use of specially designed aluminum frames effectively enhances the mechanical performance of the "DF" components and the safety of the system Install efficiency.
Component Specifications
144DL (144片,Single crystal-double glass P type,frameless):YLxxxDL72 1/2 (xxx=Pmax)
144DF (144片,Single crystal-double glass P type,framed):YLxxxDF72 1/2 (xxx=Pmax)
| Electrical performance parameters under standard test conditions ( STC ) | |||||||||||
| Peak power | Pmax | W | 525 | ||||||||
| Peak power voltage | Vmax | V | 41.15 | ||||||||
| Peak power current | I max | A | 12.76 | ||||||||
| Open circuit voltage | Voc | V | 49.00 | ||||||||
| Short circuit current | I sc | A | 13.69 | ||||||||
| Power tolerance | ΔPmax | W | 0 / + 5 | ||||||||
| Module efficiency@144DL | HPmax | % | 20.42 | ||||||||
| Module efficiency@144DF | ŋPmax | % | 20.29 | ||||||||
| Electrical performance parameters at nominal operating temperature ( NMOT ) | |||||||||||
| Peak power | Pmax | W | 399.48 | ||||||||
| Peak power voltage | Vmax | V | 39.24 | ||||||||
| Peak power current | I max | A | 10.18 | ||||||||
| Open circuit voltage | Voc | V | 46.58 | ||||||||
| Short circuit current | I sc | A | 11.03 | ||||||||
| Dual-sided output power (back side power gain) | |||||||||||
| Peak power (power gain 10% ) | Pmax10 | W | 578 | ||||||||
| Peak power (power gain 15% ) | Pmax15 | W | 604 | ||||||||
| Peak power (power gain 25% ) | Pmax25 | W | 656 | ||||||||
| Electro-referencing characteristics | |||||||||||
| Double-sided coefficient | φ | % | 70±5 | Temperature coefficient of short-circuit current | αIsc | % / °C | 0.04 | ||||
| Nominal operating temperature | NMOT | °C | 39±2 | Open circuit voltage temperature coefficient | βVoc | % / °C | --0.30 | ||||
| Tolerances for peak power, open circuit voltage and short circuit current | % | ±3 | Temperature coefficient of peak power | γPmax | % / °C | --0.35 | |||||
| STC:irradiance 1000W·m-2,battery temperature 25°C,atmospheric quality AM1 .5,according to EN 60904-3. NMOT:at irradiance 800W·m-2,ambient temperature 20℃,wind speed1m ·s-1,operating temperature of the module at the maximum power point. |
|||||||||||
| Operating conditions | Materials | ||||||||||
| Maximum system voltage | 1500V | Batteries (type / quantity) | Monocrystalline P-type / 6 × 24 | ||||||||
| Maximum fuse rating* | 20A | Glass (material / thickness) | Low iron semi-tempered glass / 2.0mm | ||||||||
| Operating temperature | -40°C to 85°C | Frame ( 144DL / 144DF ) | None / Anodised aluminium alloy | ||||||||
| Hail impact (diameter / speed) | 25mm / 23m·s-1 | Junction box (type / protection class) | Separate / ≥ IP67 | ||||||||
| Positive snow load ( 144DL / 144DF ) | 3000Pa / 5400Pa | Cable (length / cross-sectional area of conductor) | 300mm ,Customized / 4mm2 | ||||||||
| Wind load on the back ( 144DL / 144DF ) | 2400Pa / 2400Pa | Connectors (type / protection class) | Matching junction box / IP67 | ||||||||
| * Do not connect two or more strings of components in parallel in the same busbar fuse. | |||||||||||
| Packaging instructions | |||||||||||
| Component size (L/W/H) | 2088mm/ 1032mm/ 5mm | Component size (L/W/H) | 2094mm/ 1038mm/ 30mm | ||||||||
| Component weight | 25.7kg | Component weight | 27.5kg | ||||||||
| Number of components per pallet | 32pcs | Number of components per pallet | 36pcs | ||||||||
| Transport (semi-trailer / flatbed) * | 22sets /30sets | Transport (semi-trailer / flatbed) * | 22sets /32sets | ||||||||
| Box dimensions (L/W/H) | 2210mm / 1125mm / 1215mm | Box dimensions (L/W/H) | 2110mm / 1110mm / 1190mm | ||||||||
| Weight per pallet | 898kg | Weight per pallet | 1036kg | ||||||||
| *Specifically calculated by the logistics company and for reference only. It is forbidden to transport a lorry in excess of its maximum load capacity. | |||||||||||
FAQ
Q:Can I have a sample order?
A:Yes, we welcome sample order to test and check quality.
Q:What about the lead time?
A:Sample needs 3 days, mass production time needs 5-7 weeks, it depends on order quantity.
Q:How do I know whether you've shipped my order or not?
A:Tracking No. will be offered as soon as your order be shipped out. Before that, our sales will be there to check the packing status, photo you the done order and let you know the forwarder picked it up.
Q:Can I use my land for solar panels?
A:Sites are ideally flat and south facing to ensure that consistent, long runs of panels can be installed for optimum energy production. If you've got the land, we can get the planning permission and secure a cost-effective connection to the grid, giving you the chance to power up the country and your bank balance.
Q:Where is the best place to put solar panels?
A:The roof is the best place for solar panels because it receives the most uninterrupted sunlight throughout the day.
Q:Which solar panel is better monocrystalline or polycrystalline?
A:Which solar panel is better monocrystalline or polycrystalline?
Polycrystalline panels have lower efficiency rates typically in the 13-16% range. Monocrystalline panels have higher efficiencies in the range of 15-20%. Because of the lower efficiency rate they are not as space-efficient since they produce less power per square foot.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.