16MM2-95MM2 N2XY Cable

1.Standard
The cable is manufactured according to the standard GB 12706-91 or IEC60502.It is suitable to be installed in the power
transmission and distribution lines with rated voltage of 0.6/1 KV(U0/U).
2.Maximum rated temperature
(1)The maximum operating temperature of cores shall not exceed 90C, when the cable is used for long period. The temperature of cores shall not exceed 250℃ at short circuit fors seconds.
(2)The installation of cables is not limited by the difference of level along the route. The ambient temperature should not be below 0℃ during installation. The minimum bending radius shall not be less than 10 times of the cable overall diameter when laying.

Installation and use
Method of choosing
The rated voltage of the cable is represented by U0/U(Um): U0 is the rated power frequency voltage between the conductor for cable design and the ground or metal shielding, U is the rated power frequency voltage between conductors for cable design, Um is The maximum value of the highest system voltage that the device can withstand.

According to the different environment and load of the cable laying, the specifications and models of the cables are being designed and selected. The non-armoured type is suitable for overhead, indoor, tunnel, cable trench and other occasions, and cannot bear the external mechanical force. The armored type can be directly buried in the ground except for the applicable conditions of the non-armoured type. Can bear certain mechanical external force. Single-core cables are not allowed to be laid in magnetic conduits. Inflammable, explosive, chemically corrosive, high temperature, low temperature and other occasions should choose a special type of cable.